whellvalue/tpvs17/tpMain/lpmain_en.ts

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="en_US">
<context>
    <name>CChannelInfo</name>
    <message>
        <source>开始读取json文件数据...</source>
        <translation type="vanished">Reading json&apos;s file data...</translation>
    </message>
    <message>
        <source>数据读取完成...</source>
        <translation type="vanished">Read complete...</translation>
    </message>
</context>
<context>
    <name>CWheelNet</name>
    <message>
        <source>IP参数设置</source>
        <translatorcomment>IP Config</translatorcomment>
        <translation type="vanished">IP Config</translation>
    </message>
</context>
<context>
    <name>ModelsModel</name>
    <message>
        <location filename="../../src/tpMain/ModelTableView.cpp" line="41"/>
        <location filename="../../src/tpMain/ModelTableView.cpp" line="44"/>
        <source>型号</source>
        <translatorcomment>Name</translatorcomment>
        <translation>Name</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/ModelTableView.cpp" line="47"/>
        <source>数量</source>
        <translatorcomment>Num</translatorcomment>
        <translation>Num</translation>
    </message>
</context>
<context>
    <name>ProgressView</name>
    <message>
        <location filename="../../src/tpMain/ProgressView.cpp" line="56"/>
        <source>取消</source>
        <translatorcomment>Cancel</translatorcomment>
        <translation>Cancel</translation>
    </message>
</context>
<context>
    <name>QAddChannelDlg</name>
    <message>
        <source>新建通道</source>
        <translatorcomment>Add New Channel</translatorcomment>
        <translation type="vanished">Add New Channel</translation>
    </message>
    <message>
        <source>发送结果：</source>
        <translatorcomment>Results:</translatorcomment>
        <translation type="vanished">Results:</translation>
    </message>
    <message>
        <source>通道名称：</source>
        <translatorcomment>Name:</translatorcomment>
        <translation type="vanished">Name:</translation>
    </message>
    <message>
        <source>备注：</source>
        <translatorcomment>About:</translatorcomment>
        <translation type="vanished">About:</translation>
    </message>
    <message>
        <source>确认</source>
        <translatorcomment>OK</translatorcomment>
        <translation type="vanished">OK</translation>
    </message>
    <message>
        <source>取消</source>
        <translatorcomment>Cancel</translatorcomment>
        <translation type="vanished">Cancel</translation>
    </message>
    <message>
        <source>警告</source>
        <translatorcomment>Warning</translatorcomment>
        <translation type="vanished">Warning</translation>
    </message>
    <message>
        <source>数据不能为空，请输入</source>
        <translatorcomment>Data cannot be empty, please enter</translatorcomment>
        <translation type="vanished">Data cannot be empty, please enter</translation>
    </message>
</context>
<context>
    <name>QAddModel</name>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="14"/>
        <source>新建模板</source>
        <translatorcomment>Add New Model</translatorcomment>
        <translation>Add New Model</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="32"/>
        <source>轮毂信息：</source>
        <translatorcomment>Hub Info:</translatorcomment>
        <translation>Hub Info:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="75"/>
        <source>轮毂型号</source>
        <translatorcomment>Name:</translatorcomment>
        <translation>Name</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="91"/>
        <location filename="../../src/tpMain/qaddmodel.ui" line="124"/>
        <location filename="../../src/tpMain/qaddmodel.ui" line="150"/>
        <source>0</source>
        <translation>0</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="98"/>
        <source>直径(mm)</source>
        <translatorcomment>Diameter(mm):</translatorcomment>
        <translation>Diameter</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="108"/>
        <source>厚度(mm)</source>
        <translatorcomment>Thickness(mm):</translatorcomment>
        <translation>Thickness</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="131"/>
        <source>旋转次数</source>
        <translatorcomment>Rotations:</translatorcomment>
        <translation>Rota</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="166"/>
        <source>确定</source>
        <translatorcomment>OK</translatorcomment>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="185"/>
        <source>取消</source>
        <translatorcomment>Cancel</translatorcomment>
        <translation>Cancel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.cpp" line="41"/>
        <source>提醒</source>
        <translatorcomment>Warning</translatorcomment>
        <translation>Warning</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.cpp" line="41"/>
        <source>信息不能为空！</source>
        <translatorcomment>The message cannot be empty!</translatorcomment>
        <translation>The message cannot be empty!</translation>
    </message>
</context>
<context>
    <name>QAddTimeDlg</name>
    <message>
        <source>时间参数设置</source>
        <translation type="vanished">Time Setting</translation>
    </message>
    <message>
        <source>确认</source>
        <translation type="vanished">OK</translation>
    </message>
    <message>
        <source>取消</source>
        <translation type="vanished">Cancel</translation>
    </message>
    <message>
        <source>时间参数：</source>
        <translation type="vanished">Time Info:</translation>
    </message>
    <message>
        <source>起始时间</source>
        <translation type="vanished">Start:</translation>
    </message>
    <message>
        <source>班次名称：</source>
        <translation type="vanished">Name:</translation>
    </message>
    <message>
        <source>hh:mm</source>
        <translation type="vanished">hh:mm</translation>
    </message>
    <message>
        <source>结束时间</source>
        <translation type="vanished">End  :</translation>
    </message>
    <message>
        <source>当天</source>
        <translation type="vanished">Same day</translation>
    </message>
    <message>
        <source>隔天</source>
        <translation type="vanished">Text day</translation>
    </message>
</context>
<context>
    <name>QAlgParamDlg</name>
    <message>
        <location filename="QAlgParamDlg.ui" line="14"/>
        <source>算法参数设置</source>
        <translation>Algo Param Setting</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="29"/>
        <source>圆半径大小过滤：</source>
        <translation>Circle Filter Size:</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="79"/>
        <source>检测背景图更换:</source>
        <translation>Background Image:</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="91"/>
        <source>查看检测背景</source>
        <translation>Change</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="105"/>
        <source>二级圆定位:</source>
        <translation>Circle Param:</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="128"/>
        <source>边缘宽度：</source>
        <translation>Edge Width:</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="153"/>
        <source>从深到浅</source>
        <translation>Dark to Write</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="158"/>
        <source>从浅到深</source>
        <translation>Write to Dark</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="171"/>
        <source>边缘对比度：</source>
        <translation>AC Thres:</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="183"/>
        <source>边缘转换：</source>
        <translation>Polarity:</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="211"/>
        <source>是否使用图像增强</source>
        <translation>Use Image Enhancement</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="223"/>
        <source>是否使用背景图找圆算法</source>
        <translation>Use Background Algo</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="234"/>
        <source>参数已生效！！！</source>
        <translation>Apply Success!!!</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="265"/>
        <source>应用</source>
        <translation>Apply</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="283"/>
        <source>退出</source>
        <translation>Close</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.cpp" line="105"/>
        <source>请选择您的背景图</source>
        <translation>Please select your background Image</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.cpp" line="134"/>
        <source>提示</source>
        <translation>Info</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.cpp" line="134"/>
        <source>背景图更新完成，请重启本软件.</source>
        <translation>Background image updated, please restart this software.</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.cpp" line="136"/>
        <source>确认</source>
        <translation>OK</translation>
    </message>
</context>
<context>
    <name>QCamSettingDlg</name>
    <message>
        <location filename="QCamSettingDlg.ui" line="14"/>
        <source>相机配置</source>
        <translation>Camera Config</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="185"/>
        <source>序列号：</source>
        <translation>Serial:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="119"/>
        <source>显示名称：</source>
        <translation>Name:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="140"/>
        <source>相机类型：</source>
        <translation>Type:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="153"/>
        <source>虚拟相机</source>
        <translation>Virtual</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="158"/>
        <source>海康相机</source>
        <translation>HIK</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="163"/>
        <source>堡盟相机</source>
        <translation>Baumer</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="206"/>
        <source>路径：</source>
        <translation>Path:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="227"/>
        <source>设置</source>
        <translation>Set</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="339"/>
        <source>图像高度：</source>
        <translation>Height:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="373"/>
        <source>Gray8</source>
        <translation>Gray8</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="378"/>
        <source>RGB32</source>
        <translation>RGB32</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="275"/>
        <source>图像宽度：</source>
        <translation>Width:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="192"/>
        <location filename="QCamSettingDlg.ui" line="251"/>
        <location filename="QCamSettingDlg.ui" line="318"/>
        <source>set</source>
        <translation>set</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="360"/>
        <source>图像格式：</source>
        <translation>Format:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="263"/>
        <source>增益：</source>
        <translation>Gain:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="296"/>
        <source>曝光：</source>
        <translation>Exposure：</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="68"/>
        <source>内触发</source>
        <translation>Internal</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="73"/>
        <source>外触发</source>
        <translation>External</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="78"/>
        <source>软触发</source>
        <translation>Soft</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="91"/>
        <location filename="QCamSettingDlg.cpp" line="109"/>
        <location filename="QCamSettingDlg.cpp" line="152"/>
        <source>打开</source>
        <translation>Open</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="103"/>
        <source>触发</source>
        <translation>Trigger</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.cpp" line="105"/>
        <location filename="QCamSettingDlg.cpp" line="149"/>
        <location filename="QCamSettingDlg.cpp" line="159"/>
        <source>关闭</source>
        <translation>Close</translation>
    </message>
</context>
<context>
    <name>QChannelManager</name>
    <message>
        <source>通道信息管理</source>
        <translatorcomment>Channel Mamager</translatorcomment>
        <translation type="vanished">Channel Mamager</translation>
    </message>
    <message>
        <source>所有通道数据</source>
        <translatorcomment>All channel Info</translatorcomment>
        <translation type="vanished">All channel Info</translation>
    </message>
    <message>
        <source>发送结果：</source>
        <translatorcomment>Result:</translatorcomment>
        <translation type="vanished">Result:</translation>
    </message>
    <message>
        <source>通道名称：</source>
        <translatorcomment>Name:</translatorcomment>
        <translation type="vanished">Name:</translation>
    </message>
    <message>
        <source>备注：</source>
        <translatorcomment>About:</translatorcomment>
        <translation type="vanished">About:</translation>
    </message>
    <message>
        <source>是否设为默认（NG流向的通道）</source>
        <translatorcomment>Set to default</translatorcomment>
        <translation type="vanished">Set to default</translation>
    </message>
    <message>
        <source>确认修改</source>
        <translatorcomment>OK</translatorcomment>
        <translation type="vanished">OK</translation>
    </message>
    <message>
        <source>退出</source>
        <translation type="vanished">Cancel</translation>
    </message>
    <message>
        <source>编号</source>
        <translation type="vanished">Num</translation>
    </message>
    <message>
        <source>通道名</source>
        <translation type="vanished">Name</translation>
    </message>
    <message>
        <source>备注</source>
        <translation type="vanished">About</translation>
    </message>
    <message>
        <source>发送结果</source>
        <translation type="vanished">Result</translation>
    </message>
    <message>
        <source>是否为默认</source>
        <translation type="vanished">Is dafault</translation>
    </message>
    <message>
        <source>默认</source>
        <translation type="vanished">Default</translation>
    </message>
</context>
<context>
    <name>QChannelMgrDlg</name>
    <message>
        <source>QChannelMgrDlg</source>
        <translation type="vanished">QChannelMgrDlg</translation>
    </message>
    <message>
        <source>所有型号及图像</source>
        <translation type="vanished">All models and images</translation>
    </message>
    <message>
        <source>型号：</source>
        <translation type="vanished">Model:</translation>
    </message>
    <message>
        <source>通道：</source>
        <translation type="vanished">Channer:</translation>
    </message>
    <message>
        <source>查找：</source>
        <translation type="vanished">Find:</translation>
    </message>
    <message>
        <source>隐藏</source>
        <translation type="vanished">Hide</translation>
    </message>
    <message>
        <source>修改</source>
        <translation type="vanished">Modify</translation>
    </message>
    <message>
        <source>0</source>
        <translation type="vanished">0</translation>
    </message>
    <message>
        <source>通道分配：</source>
        <translation type="vanished">Channel assignment:</translation>
    </message>
    <message>
        <source>删除通道</source>
        <translation type="vanished">Delete channel</translation>
    </message>
    <message>
        <source>增加通道</source>
        <translation type="vanished">Add channel</translation>
    </message>
    <message>
        <source>刷新</source>
        <translation type="vanished">Refresh</translation>
    </message>
    <message>
        <source>通道管理</source>
        <translation type="vanished">Channel management</translation>
    </message>
</context>
<context>
    <name>QCryptokeyUI</name>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="14"/>
        <source>注册</source>
        <translation>Register</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="34"/>
        <source>退出</source>
        <translation>Close</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="66"/>
        <source>机器码：</source>
        <translation>Serial:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="99"/>
        <source>注册码：</source>
        <translation>License:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="114"/>
        <source>激活</source>
        <translation>Active</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="126"/>
        <source>请输入注册码</source>
        <translation>Please input License</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="141"/>
        <source>激活状态：</source>
        <translation>State:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="156"/>
        <source>未激活</source>
        <translation>No Active</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.cpp" line="41"/>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.cpp" line="49"/>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.cpp" line="57"/>
        <source>提示</source>
        <translation>Info</translation>
    </message>
</context>
<context>
    <name>QDebugDlg</name>
    <message>
        <location filename="QDebugDlg.ui" line="14"/>
        <source>QDebugDlg</source>
        <translation>QDebugDlg</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="39"/>
        <source>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;SimSun&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;右侧是算法裁剪后的图像、匹配的型号、算法匹配的最小阈值、匹配模板对应的直径和厚度（新建模板时输入的）&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;SimSun&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;On the right is the image cropped by the algorithm, the matched model, the minimum threshold for algorithm matching, and the diameter and thickness of the matching template.(Input when creating a new template)&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="68"/>
        <source>000000</source>
        <translation>000000</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="82"/>
        <source>0.0</source>
        <translation>0.0</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="96"/>
        <source>厚度mm:</source>
        <translation>Thickness(mm):</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="110"/>
        <location filename="QDebugDlg.ui" line="153"/>
        <source>0</source>
        <translation>0</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="130"/>
        <source>直径mm：</source>
        <translation>Diameter(mm):</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="179"/>
        <location filename="QDebugDlg.cpp" line="98"/>
        <location filename="QDebugDlg.cpp" line="103"/>
        <source>开始模拟检测</source>
        <translation>Continus</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="198"/>
        <source>采集一张</source>
        <translation>Signal</translation>
    </message>
    <message>
        <location filename="QDebugDlg.cpp" line="99"/>
        <source>停止</source>
        <translation>Stop</translation>
    </message>
</context>
<context>
    <name>QDia2ThSetting</name>
    <message>
        <source>直径标定</source>
        <translation type="vanished">Diameter Standard</translation>
    </message>
    <message>
        <source>K:表示斜率，B：基准点，直径=高度*K+B</source>
        <translation type="vanished">K: rate, B: base point, Diameter = H * K + B</translation>
    </message>
    <message>
        <source>确认修改</source>
        <translation type="vanished">OK</translation>
    </message>
    <message>
        <source>退出</source>
        <translation type="vanished">Cancel</translation>
    </message>
    <message>
        <source>B：</source>
        <translation type="vanished">B:</translation>
    </message>
    <message>
        <source>K:</source>
        <translation type="vanished">K:</translation>
    </message>
    <message>
        <source>提示</source>
        <translation type="vanished">Warning</translation>
    </message>
    <message>
        <source>修改完成，参数已生效！</source>
        <translation type="vanished">The modification is completed and the parameters are in effect!</translation>
    </message>
    <message>
        <source>确定</source>
        <translation type="vanished">OK</translation>
    </message>
</context>
<context>
    <name>QIPConfigDlg</name>
    <message>
        <source>QIPConfigDlg</source>
        <translation type="vanished">QIPConfigDlg</translation>
    </message>
    <message>
        <source>本机服务器IP地址设置</source>
        <translation type="vanished">Server address Settings</translation>
    </message>
    <message>
        <source>IP 地址(I)：</source>
        <translation type="vanished">Address：</translation>
    </message>
    <message>
        <source>关闭服务</source>
        <translation type="vanished">Close Server</translation>
    </message>
    <message>
        <source>开放端口：</source>
        <translation type="vanished">Port:</translation>
    </message>
    <message>
        <source>打开服务</source>
        <translation type="vanished">Open Server</translation>
    </message>
    <message>
        <source>目标客户端IP地址设置</source>
        <translation type="vanished">Client Address Settings</translation>
    </message>
    <message>
        <source>源端口：</source>
        <translation type="vanished">Port:</translation>
    </message>
    <message>
        <source>确定</source>
        <translation type="vanished">OK</translation>
    </message>
</context>
<context>
    <name>QModNamedlg</name>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.ui" line="14"/>
        <source>模板名修改</source>
        <translation>Model Name modify</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.ui" line="29"/>
        <source>确认修改</source>
        <translation>Cancel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.ui" line="42"/>
        <location filename="../../src/tpMain/qmodnamedlg.cpp" line="84"/>
        <source>取消</source>
        <translation>Cancel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.ui" line="62"/>
        <source>缩略图：</source>
        <translation>Image:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.ui" line="74"/>
        <source>TextLabel</source>
        <translation>TextLabel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.ui" line="89"/>
        <source>旧型号名：</source>
        <translation>Old Name:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.ui" line="112"/>
        <source>新型号名：</source>
        <translation>New Name:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.cpp" line="64"/>
        <location filename="../../src/tpMain/qmodnamedlg.cpp" line="69"/>
        <source>提示</source>
        <translation>Prompt</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.cpp" line="64"/>
        <source>新型号名不能为空！</source>
        <translation>The new name can&apos;t be empty!</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.cpp" line="69"/>
        <source>型号库中已包含该型号，请重新设置型号名！</source>
        <translation>The model has been included in the model library. Please reset the model name!</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.cpp" line="83"/>
        <source>确认</source>
        <translation>OK</translation>
    </message>
</context>
<context>
    <name>QModelMgrDlg</name>
    <message>
        <location filename="QModelMgrDlg.ui" line="14"/>
        <source>QModelMgrDlg</source>
        <translation>QModelMgrDlg</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="227"/>
        <source>轮毂信息：</source>
        <translation>Info:</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="288"/>
        <source>型号</source>
        <translation>Name</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="456"/>
        <source>0%</source>
        <translation>0%</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="436"/>
        <source>阈值调节</source>
        <translation>Threshold</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="392"/>
        <source>严格</source>
        <translation>Strict</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="321"/>
        <source>旋转次数</source>
        <translation>Rotate</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="509"/>
        <source>缩略图</source>
        <translation>Image</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="417"/>
        <source>宽松</source>
        <translation>Easy</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="267"/>
        <source>厚度(mm)</source>
        <translation>Thickness(mm)</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="243"/>
        <source>直径(mm)</source>
        <translation>Diameter(mm)</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="363"/>
        <source>加入训练</source>
        <translation>Add to train</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="535"/>
        <source>基本操作</source>
        <translation>Operation</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="563"/>
        <location filename="QModelMgrDlg.ui" line="566"/>
        <source>删除模板</source>
        <translation>Delete</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="579"/>
        <source>训练当前模板</source>
        <translation>Train</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="582"/>
        <source>训练模板</source>
        <translation>Train</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="601"/>
        <source>添加新的模板</source>
        <translation>Add</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="604"/>
        <source>新建模板</source>
        <translation>New</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="547"/>
        <source>训练所有模板，消耗时间会较长</source>
        <translation>Training all templates will take longer</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="550"/>
        <source>训练全部</source>
        <translation>Train all</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="620"/>
        <source>确认修改，每次修改模板的参数后都要确认修改才有效</source>
        <translation>Confirm the modification, every time you modify the parameters of the template, you must confirm the modification to be effective</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="623"/>
        <source>修改确认</source>
        <translation>Mod</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="636"/>
        <source>修改型号名</source>
        <translation>Mod Name</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="120"/>
        <source>图片显示：</source>
        <translation>Image display:</translation>
    </message>
    <message>
        <source>TextLabel</source>
        <translation type="vanished">TextLabel</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="154"/>
        <location filename="QModelMgrDlg.ui" line="157"/>
        <source>添加已裁剪的轮毂图片</source>
        <translation>Add cropped wheel image</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="160"/>
        <source>追加</source>
        <translation>Add</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="192"/>
        <location filename="QModelMgrDlg.ui" line="195"/>
        <source>删除所有模板</source>
        <translation>Delete all</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="25"/>
        <source>模板型号查询</source>
        <translation>Template</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="48"/>
        <source>查找：</source>
        <translation>Find:</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="79"/>
        <source>数量</source>
        <translation>Quantity</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="101"/>
        <source>modelID</source>
        <translation>modelID</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="137"/>
        <location filename="QModelMgrDlg.cpp" line="142"/>
        <location filename="QModelMgrDlg.cpp" line="183"/>
        <location filename="QModelMgrDlg.cpp" line="188"/>
        <location filename="QModelMgrDlg.cpp" line="228"/>
        <location filename="QModelMgrDlg.cpp" line="233"/>
        <location filename="QModelMgrDlg.cpp" line="238"/>
        <location filename="QModelMgrDlg.cpp" line="308"/>
        <location filename="QModelMgrDlg.cpp" line="328"/>
        <location filename="QModelMgrDlg.cpp" line="392"/>
        <location filename="QModelMgrDlg.cpp" line="408"/>
        <location filename="QModelMgrDlg.cpp" line="412"/>
        <location filename="QModelMgrDlg.cpp" line="426"/>
        <location filename="QModelMgrDlg.cpp" line="434"/>
        <source>提示</source>
        <translation>Prompt</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="137"/>
        <location filename="QModelMgrDlg.cpp" line="142"/>
        <source>请选择一个您要追加图像的型号！</source>
        <translation>Please select a model you want to add an image to!</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="153"/>
        <source>加载图像</source>
        <translation>Load image</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="154"/>
        <source>图像加载中,请稍后.....</source>
        <translation>The image is loading, please wait...</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="163"/>
        <source>添加失败，不能添加带检测背景的图片作为模板！！！</source>
        <translation>Failed to add, you cannot add a picture with a detection background as a template! ! !</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="174"/>
        <source>加载完成</source>
        <translation>Download finished</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="183"/>
        <location filename="QModelMgrDlg.cpp" line="188"/>
        <location filename="QModelMgrDlg.cpp" line="434"/>
        <source>请选择一个您要修改的型号！</source>
        <translation>Please select a model you want to modify!</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="219"/>
        <source>修改了模板</source>
        <translation>Modified template</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="219"/>
        <source>的参数</source>
        <translation>The parameters of the</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="221"/>
        <source>修改成功！</source>
        <translation>Successfully modified!</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="228"/>
        <location filename="QModelMgrDlg.cpp" line="233"/>
        <source>请选择一个您要删除的型号</source>
        <translation>Please select a model you want to delete</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="236"/>
        <source>按下了删除模板按钮</source>
        <translation>Press the Delete Template button</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="238"/>
        <source>是否删除型号</source>
        <translation>Whether to delete the model</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="238"/>
        <source>产品模板</source>
        <translation>Product template</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="245"/>
        <source>删除了模板</source>
        <translation>Template deleted</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="250"/>
        <location filename="QModelMgrDlg.cpp" line="295"/>
        <location filename="QModelMgrDlg.cpp" line="357"/>
        <location filename="QModelMgrDlg.cpp" line="488"/>
        <location filename="QModelMgrDlg.cpp" line="494"/>
        <location filename="QModelMgrDlg.cpp" line="535"/>
        <location filename="QModelMgrDlg.cpp" line="874"/>
        <location filename="QModelMgrDlg.cpp" line="999"/>
        <source>共</source>
        <translation>with</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="250"/>
        <location filename="QModelMgrDlg.cpp" line="295"/>
        <location filename="QModelMgrDlg.cpp" line="488"/>
        <location filename="QModelMgrDlg.cpp" line="494"/>
        <location filename="QModelMgrDlg.cpp" line="999"/>
        <source>个型号</source>
        <translation>Model number</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="258"/>
        <source>按下了添加模板按钮</source>
        <translation>Press the Add Template button</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="268"/>
        <source>产品信息设置</source>
        <translation>Product information settings</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="287"/>
        <source>添加了一个新的模型</source>
        <translation>Added a new model</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="308"/>
        <source>请选择一个您要训练的型号！</source>
        <translation>Please select a model you want to train!</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="319"/>
        <location filename="QModelMgrDlg.cpp" line="337"/>
        <source>训练模板线程未退出，请稍等</source>
        <translation>The training template thread did not exit, please wait</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="328"/>
        <source>将对所有型号模板进行重新训练，期间系统的检测功能将不能正常运行直到模板训练完成，全部重新训练模板将需要很长时间，期间将不能进行其他工作，是否继续执行？</source>
        <translation>All model templates will be retrained. During this period, the system&apos;s detection function will not operate normally until the template training is completed. It will take a long time for all templates to be retrained, during which other work will not be possible. Do you want to continue?</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="349"/>
        <source>确定删除该图像?</source>
        <translation>Determine to delete the image?</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="350"/>
        <source>模板图片删除</source>
        <translation>Template picture deletion</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="357"/>
        <location filename="QModelMgrDlg.cpp" line="535"/>
        <location filename="QModelMgrDlg.cpp" line="874"/>
        <source>个图像</source>
        <translation>Image</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="406"/>
        <source>警告</source>
        <translation>Warning</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="406"/>
        <source>即将删除模板库里的所有模板，是否继续？</source>
        <translation>All templates in the template library will be deleted. Do you want to continue?</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="408"/>
        <source>再次确认，是否全部删除？</source>
        <translation>Confirm again, delete all?</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="412"/>
        <source>没有模板!!!</source>
        <translation>No template!!!</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="426"/>
        <source>全部删除完成!!!</source>
        <translation>Complete deletion!!!</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="537"/>
        <source>图像数量少于</source>
        <translation>The number of images is less than</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="537"/>
        <source>个,请及时补充训练样本</source>
        <translation>, please add training samples in time</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="597"/>
        <location filename="QModelMgrDlg.cpp" line="600"/>
        <location filename="QModelMgrDlg.cpp" line="607"/>
        <location filename="QModelMgrDlg.cpp" line="661"/>
        <location filename="QModelMgrDlg.cpp" line="686"/>
        <location filename="QModelMgrDlg.cpp" line="690"/>
        <location filename="QModelMgrDlg.cpp" line="691"/>
        <source>模板更新进度</source>
        <translation>Template update progress</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="597"/>
        <source>正在初始化所有模板 共需要训练%1个模板,请稍后.....</source>
        <translation>All templates are being initialized. A total of%1 templates need to be trained. Please wait a moment...</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="606"/>
        <source>正在训练%1的模板 已完成%2/%3,请稍后.....</source>
        <translation>The template training %1 is complete %2/%3, please wait...</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="660"/>
        <source>%1的模板获取特征 已完成%2/%3,请稍后.....</source>
        <translation>Template capture feature for %1 is complete for %2/%3, please wait...</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="685"/>
        <source>%1的模板训练完成 已完成%2/%3,请稍后.....</source>
        <translation>Template training for %1 completed %2/%3, please wait...</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="691"/>
        <source>全部模板更新完成！%1s</source>
        <translation>All templates updated!The %1 s</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="692"/>
        <source>对全部模板进行了重新训练，共%1个模板</source>
        <translation>All templates were retrained, with a total of%1 template</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="702"/>
        <source>模板正在准备请稍后.....</source>
        <translation>The template is being prepared Please wait a moment.....</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="703"/>
        <location filename="QModelMgrDlg.cpp" line="710"/>
        <location filename="QModelMgrDlg.cpp" line="717"/>
        <location filename="QModelMgrDlg.cpp" line="718"/>
        <location filename="QModelMgrDlg.cpp" line="724"/>
        <location filename="QModelMgrDlg.cpp" line="760"/>
        <location filename="QModelMgrDlg.cpp" line="781"/>
        <location filename="QModelMgrDlg.cpp" line="782"/>
        <location filename="QModelMgrDlg.cpp" line="783"/>
        <location filename="QModelMgrDlg.cpp" line="791"/>
        <location filename="QModelMgrDlg.cpp" line="792"/>
        <location filename="QModelMgrDlg.cpp" line="793"/>
        <source>模板训练进度</source>
        <translation>Template training progress</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="717"/>
        <location filename="QModelMgrDlg.cpp" line="718"/>
        <source>%1型号没有图片不能训练！</source>
        <translation>%1 Model can not be trained without pictures!</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="783"/>
        <source>%1的模板 正在获取特征值,请稍后....</source>
        <translation>The%1 template is getting the characteristic value. Please wait...</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="793"/>
        <source>训练完成！%1s</source>
        <translation>Training completed! %1s</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="795"/>
        <source>训练了模板:%1</source>
        <translation>Model training:%1</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="949"/>
        <source>确认</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="950"/>
        <source>取消</source>
        <translation>Cancel</translation>
    </message>
</context>
<context>
    <name>QMySplashScreen</name>
    <message>
        <location filename="../../src/tpMain/splashScreen/qmysplashscreen.cpp" line="23"/>
        <source>程序正在启动...</source>
        <translation>The program is starting...</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <source>虚拟相机触发</source>
        <translation type="vanished">Virtual camera trigger</translation>
    </message>
    <message>
        <source>硬件相机触发</source>
        <translation type="vanished">Hardware camera trigger</translation>
    </message>
    <message>
        <source>调试免登陆</source>
        <translation type="vanished">Debugging free login</translation>
    </message>
    <message>
        <source>正常工作模式</source>
        <translation type="vanished">Normal working mode</translation>
    </message>
    <message>
        <source>传感器触发</source>
        <translation type="vanished">Sensor trigger</translation>
    </message>
    <message>
        <source>软件触发</source>
        <translation type="vanished">Software trigger</translation>
    </message>
    <message>
        <source>下降沿触发</source>
        <translation type="vanished">Falling edge trigger</translation>
    </message>
    <message>
        <source>上升沿触发</source>
        <translation type="vanished">Rising edge trigger</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/lpGlobalConfig.cpp" line="44"/>
        <source>识别定位一体系统</source>
        <translation>Detection System</translation>
    </message>
</context>
<context>
    <name>QSettingDlg</name>
    <message>
        <source>QSettingDlg</source>
        <translation type="vanished">QSettingDlg</translation>
    </message>
</context>
<context>
    <name>QShowImg</name>
    <message>
        <location filename="../../src/tpMain/qshowimg.ui" line="14"/>
        <source>检测背景图像显示</source>
        <translation>Background display</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qshowimg.ui" line="23"/>
        <source>退出</source>
        <translation>Close</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qshowimg.ui" line="30"/>
        <source>我要更换背景</source>
        <translation>Change</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qshowimg.ui" line="56"/>
        <source>pic</source>
        <translation>pic</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qshowimg.cpp" line="34"/>
        <source>没有用于检测的背景图，请更换检测背景</source>
        <translation>There is no background image for testing. Please change the testing background</translation>
    </message>
</context>
<context>
    <name>QSystemSettingDlg</name>
    <message>
        <source>相关设备配置</source>
        <translation type="vanished">Device Setting</translation>
    </message>
    <message>
        <source>检测图像设置</source>
        <translation type="vanished">Image Settings</translation>
    </message>
    <message>
        <source>PLC相关设置</source>
        <translation type="vanished">PLC Settings</translation>
    </message>
    <message>
        <source>报警灯测试</source>
        <translation type="vanished">Alarm Test</translation>
    </message>
    <message>
        <source>高级功能</source>
        <translation type="vanished">Developer</translation>
    </message>
    <message>
        <source>属性</source>
        <translation type="vanished">Property</translation>
    </message>
    <message>
        <source>值</source>
        <translation type="vanished">Value</translation>
    </message>
    <message>
        <source>语言</source>
        <translation type="vanished">Language</translation>
    </message>
    <message>
        <source>检测背景更换</source>
        <translation type="vanished">Background</translation>
    </message>
    <message>
        <source>抠图后</source>
        <translation type="vanished">After cutout</translation>
    </message>
    <message>
        <source>原图</source>
        <translation type="vanished">SourceImage</translation>
    </message>
    <message>
        <source>背景图</source>
        <translation type="vanished">Background</translation>
    </message>
    <message>
        <source>检测结果</source>
        <translation type="vanished">Result</translation>
    </message>
    <message>
        <source>图像保存路径</source>
        <translation type="vanished">Image Save Path</translation>
    </message>
    <message>
        <source>设置保存路径</source>
        <translation type="vanished">Save path</translation>
    </message>
    <message>
        <source>打开图像路径</source>
        <translation type="vanished">Open Image Path</translation>
    </message>
    <message>
        <source>保存当前设置</source>
        <translation type="vanished">Save current settings</translation>
    </message>
    <message>
        <source>保存已匹配图</source>
        <translation type="vanished">Save matched Image</translation>
    </message>
    <message>
        <source>保存无匹配图</source>
        <translation type="vanished">Save Unmatched Image</translation>
    </message>
    <message>
        <source>使用背景图</source>
        <translation type="vanished">Use background</translation>
    </message>
    <message>
        <source>轮毂全去A通道</source>
        <translation type="vanished">Hub All-to-A Channel</translation>
    </message>
    <message>
        <source>查看检测背景</source>
        <translation type="vanished">Check Background</translation>
    </message>
    <message>
        <source>保存参数</source>
        <translation type="vanished">Save Parameters</translation>
    </message>
    <message>
        <source>保存设置</source>
        <translation type="vanished">Save Settings</translation>
    </message>
    <message>
        <source>传感器触发滤波(ms)</source>
        <translation type="vanished">Sensor filtering (ms)</translation>
    </message>
    <message>
        <source>相机触发延时(ms)</source>
        <translation type="vanished">Sensor filtering (ms)</translation>
    </message>
    <message>
        <source>相机触发脉宽(ms)</source>
        <translation type="vanished">Camera width (ms)</translation>
    </message>
    <message>
        <source>光源熄灭延时时间(ms)</source>
        <translation type="vanished">Light delay time (ms)</translation>
    </message>
    <message>
        <source>传感器触发类型</source>
        <translation type="vanished">Sensor trigger type</translation>
    </message>
    <message>
        <source>保持结果时长(ms)</source>
        <translation type="vanished">Result hold Times (ms)</translation>
    </message>
    <message>
        <source>连接超时次数</source>
        <translation type="vanished">Connection timeouts</translation>
    </message>
    <message>
        <source>超时是否显示信息</source>
        <translation type="vanished">Display information</translation>
    </message>
    <message>
        <source>是否自动重启服务器</source>
        <translation type="vanished">Auto restart servering</translation>
    </message>
    <message>
        <source>是否保存超时日志</source>
        <translation type="vanished">Save timeout log</translation>
    </message>
    <message>
        <source>发送并保存</source>
        <translation type="vanished">Send and save</translation>
    </message>
    <message>
        <source>超时提醒n次后自动重启服务</source>
        <translation type="vanished">Automatically restart service after n timeout reminders</translation>
    </message>
    <message>
        <source>是否显示提示</source>
        <translation type="vanished">Display Warning</translation>
    </message>
    <message>
        <source>勾选后通信超时时会显示提醒信息</source>
        <translation type="vanished">Reminder message will be displayed when communication timeout occurs after checking</translation>
    </message>
    <message>
        <source>勾选后通信超时次数达到后，系统将自动重启服务，PLC会自动重新连接</source>
        <translation type="vanished">After checking the number of communication timeouts reached, the system will automatically restart the service, and the PLC will automatically reconnect</translation>
    </message>
    <message>
        <source>保存信息到系统日志</source>
        <translation type="vanished">Save information to system log</translation>
    </message>
    <message>
        <source>勾选后表示超时信息将自动保存到系统日志中，便于查询</source>
        <translation type="vanished">Check to indicate that the timeout information will be automatically saved to the system log for easy query</translation>
    </message>
    <message>
        <source>红灯</source>
        <translation type="vanished">Red light</translation>
    </message>
    <message>
        <source>绿灯</source>
        <translation type="vanished">Green light</translation>
    </message>
    <message>
        <source>黄灯</source>
        <translation type="vanished">Yellow light</translation>
    </message>
    <message>
        <source>蜂鸣</source>
        <translation type="vanished">Buzzing</translation>
    </message>
    <message>
        <source>红灯闪一下</source>
        <translation type="vanished">Red light flashed</translation>
    </message>
    <message>
        <source>绿灯闪一下</source>
        <translation type="vanished">Green light flashed</translation>
    </message>
    <message>
        <source>黄灯闪一下</source>
        <translation type="vanished">Yellow light flashed</translation>
    </message>
    <message>
        <source>蜂鸣响一下</source>
        <translation type="vanished">Bee rings</translation>
    </message>
    <message>
        <source>开发者使用</source>
        <translation type="vanished">Developers use</translation>
    </message>
    <message>
        <source>相机模式</source>
        <translation type="vanished">Camera mode</translation>
    </message>
    <message>
        <source>虚拟相机触发时间</source>
        <translation type="vanished">Trigger times</translation>
    </message>
    <message>
        <source>系统模式</source>
        <translation type="vanished">System mode</translation>
    </message>
    <message>
        <source>相机触发模式</source>
        <translation type="vanished">Trigger mode</translation>
    </message>
    <message>
        <source>串口发送心跳包</source>
        <translation type="vanished">Serial Port</translation>
    </message>
    <message>
        <source>网络发送心跳包</source>
        <translation type="vanished">Network</translation>
    </message>
    <message>
        <source>串口发送通道结果</source>
        <translation type="vanished">Serial Port</translation>
    </message>
    <message>
        <source>网络发送检测结果</source>
        <translation type="vanished">Network</translation>
    </message>
    <message>
        <source>网络发送通道结果</source>
        <translation type="vanished">Network</translation>
    </message>
    <message>
        <source>光栅使用标志</source>
        <translation type="vanished">Rester</translation>
    </message>
    <message>
        <source>保存高度厚度数据</source>
        <translation type="vanished">Data</translation>
    </message>
    <message>
        <source>通道分配</source>
        <translation type="vanished">Channel allocate</translation>
    </message>
    <message>
        <source>启动时是否检测</source>
        <translation type="vanished">Whether to detect at startup</translation>
    </message>
    <message>
        <source>显示厚度数据</source>
        <translation type="vanished">Display thickness data</translation>
    </message>
    <message>
        <source>显示厚度采样数据</source>
        <translation type="vanished">Display thickness sampling data</translation>
    </message>
    <message>
        <source>使用光栅获取厚度</source>
        <translation type="vanished">Acquiring Thickness by Grating</translation>
    </message>
    <message>
        <source>保存数据用于测试</source>
        <translation type="vanished">Save data for testing</translation>
    </message>
    <message>
        <source>是否使用通道分配</source>
        <translation type="vanished">Whether to use channel allocation or not</translation>
    </message>
    <message>
        <source>是否启动就开始检测</source>
        <translation type="vanished">Start checking if it&apos;s started</translation>
    </message>
    <message>
        <source>是否显示</source>
        <translation type="vanished">Whether to display</translation>
    </message>
    <message>
        <source>保存</source>
        <translation type="vanished">Save</translation>
    </message>
    <message>
        <source>请选择您的背景图</source>
        <translation type="vanished">Please select your background map</translation>
    </message>
    <message>
        <source>提示</source>
        <translatorcomment>Info</translatorcomment>
        <translation type="vanished">Warning</translation>
    </message>
    <message>
        <source>背景图更新完成，请重启本软件.</source>
        <translation type="vanished">Background image updated, please restart this software.</translation>
    </message>
    <message>
        <source>确认</source>
        <translation type="vanished">OK</translation>
    </message>
    <message>
        <source>打开文件夹</source>
        <translation type="vanished">Open folder</translation>
    </message>
</context>
<context>
    <name>QSystemSettingUI</name>
    <message>
        <source>系统设置</source>
        <translation type="vanished">System settings</translation>
    </message>
</context>
<context>
    <name>QTimeMgrDlg</name>
    <message>
        <source>班次管理</source>
        <translation type="vanished">Classes management</translation>
    </message>
    <message>
        <source>未选中</source>
        <translation type="vanished">UnSelect</translation>
    </message>
    <message>
        <source>添加时间</source>
        <translation type="vanished">Add</translation>
    </message>
    <message>
        <source>删除时间</source>
        <translation type="vanished">Delete</translation>
    </message>
    <message>
        <source>修改时间</source>
        <translation type="vanished">Modify</translation>
    </message>
    <message>
        <source>班次</source>
        <translation type="vanished">Classes</translation>
    </message>
    <message>
        <source>起始时间</source>
        <translation type="vanished">Start</translation>
    </message>
    <message>
        <source>结束时间</source>
        <translation type="vanished">End</translation>
    </message>
    <message>
        <source>设置参数</source>
        <translation type="vanished">Setting parameters</translation>
    </message>
    <message>
        <source>当天</source>
        <translation type="vanished">Same day</translation>
    </message>
    <message>
        <source>隔天</source>
        <translation type="vanished">Next day</translation>
    </message>
    <message>
        <source>提示</source>
        <translation type="vanished">Prompt</translation>
    </message>
    <message>
        <source>未选择班次，请选择进行修改。</source>
        <translation type="vanished">No classes is selected, please select to modify.</translation>
    </message>
    <message>
        <source>确认</source>
        <translation type="vanished">Ok</translation>
    </message>
    <message>
        <source>您确定要删除 %1 班次？</source>
        <translation type="vanished">Are you sure you want to delete the %1 classes?</translation>
    </message>
    <message>
        <source>取消</source>
        <translation type="vanished">Canncel</translation>
    </message>
</context>
<context>
    <name>QWorkItemDlg</name>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.cpp" line="12"/>
        <source>工单信息设置</source>
        <translation>Work List information setting</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.cpp" line="37"/>
        <location filename="../../src/tpMain/qworkItemdlg.cpp" line="44"/>
        <source>警告</source>
        <translation>Warning</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.cpp" line="37"/>
        <source>名称不能为空.</source>
        <translation>The name cannot be empty.</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.cpp" line="44"/>
        <source>你输入的名称:%1 重复.</source>
        <translation>The name :%1 repeat.</translation>
    </message>
</context>
<context>
    <name>QWorkItemUI</name>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.ui" line="14"/>
        <source>信息设置</source>
        <translation>Information setup</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.ui" line="24"/>
        <source>确定</source>
        <translation>Ok</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.ui" line="44"/>
        <source>取消</source>
        <translation>Cancel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.ui" line="60"/>
        <source>备注信息：</source>
        <translation>Note information:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.ui" line="69"/>
        <source>名称：</source>
        <translation>Name:</translation>
    </message>
</context>
<context>
    <name>QWorkMgrUI</name>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="19"/>
        <source>QWorkMgrUI</source>
        <translation>QWorkMgrUI</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="91"/>
        <source>工作任务表</source>
        <translation>Table List</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="128"/>
        <source>添加任务单</source>
        <translation>Add Table</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="131"/>
        <source>添加</source>
        <translation>Add</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="143"/>
        <source>删除任务单</source>
        <translation>Delete Table List</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="146"/>
        <source>删除</source>
        <translation>Del</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="158"/>
        <source>修改任务单名称或备注信息</source>
        <translation>Modify Table List Name or Note Information</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="161"/>
        <source>修改</source>
        <translation>Mod</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="173"/>
        <source>使用任务单</source>
        <translation>Set Use</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="176"/>
        <source>应用</source>
        <translation>Use</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="208"/>
        <source>当前选择的任务表：</source>
        <translation>Current Table：</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="252"/>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="492"/>
        <source>数量</source>
        <translation>Num</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="299"/>
        <source>添加型号到检测列表</source>
        <translation>Add model to table</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="302"/>
        <source>&lt;&lt;&lt;</source>
        <translation>&lt;&lt;&lt;</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="334"/>
        <source>从检测列表移除所选型号</source>
        <translation>Remove the selected model from the table</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="337"/>
        <source>&gt;&gt;&gt;</source>
        <translation>&gt;&gt;&gt;</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="368"/>
        <source>缩略图</source>
        <translation>Image</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="385"/>
        <source>只看已选</source>
        <translation>Selected</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="403"/>
        <source>只看未选</source>
        <translation>Unselected</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="421"/>
        <source>显示全部</source>
        <translation>Show all</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="463"/>
        <source>查找：</source>
        <translation>Find:</translation>
    </message>
    <message>
        <source>其他</source>
        <translation type="vanished">Others</translation>
    </message>
    <message>
        <source>按照直径检测</source>
        <translation type="vanished">By diameter</translation>
    </message>
    <message>
        <source>按照厚度检测</source>
        <translation type="vanished">By thickness</translation>
    </message>
    <message>
        <source>手动发送模板库</source>
        <translation type="vanished">Send Models</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="29"/>
        <source>检测模板管理</source>
        <translation>Detection Model Management</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="163"/>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="510"/>
        <source>共 %1 个</source>
        <translation>Total of: %1</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="202"/>
        <source>当前使用的工单为 %1 </source>
        <translation>The current Table is%1 </translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="295"/>
        <source>以下型号为重复添加：
%1已被忽略.</source>
        <translation>The models are added repeatedly:%1, And They have been ignored.</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="296"/>
        <source>提醒</source>
        <translation>Warning</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="298"/>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="414"/>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="421"/>
        <source>确定</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="372"/>
        <source>工单 %1 被设为应用</source>
        <translation>Table %1 is seted to Using</translation>
    </message>
    <message>
        <source>发送模板库</source>
        <translation type="vanished">Send Template Library</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="412"/>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="419"/>
        <source>警告</source>
        <translation>Warning</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="412"/>
        <source>%1任务单正在使用不能被删除,请先切换到其他任务单,再删除该任务单？</source>
        <translation>%1 Table is Using and cannot be deleted. Please switch to another Table before deleting the Table?</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="415"/>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="422"/>
        <source>取消</source>
        <translation>Cancel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="419"/>
        <source>是否要删除 %1 模型？</source>
        <translation>Do you want to delete the%1 model?</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="557"/>
        <source>序号</source>
        <translation>Num</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="557"/>
        <source>内容</source>
        <translation>About</translation>
    </message>
</context>
<context>
    <name>RoiImgViewer</name>
    <message>
        <location filename="../../src/tpMain/algela/RoiImgViewer.cpp" line="519"/>
        <location filename="../../src/tpMain/algela/RoiImgViewer.cpp" line="533"/>
        <source>line item is not created</source>
        <translation>line item is not created</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/algela/RoiImgViewer.cpp" line="553"/>
        <source>line item is already created</source>
        <translation>line item is already created</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/algela/RoiImgViewer.cpp" line="564"/>
        <source>rect item is already created</source>
        <translation>rect item is already created</translation>
    </message>
</context>
<context>
    <name>WheelCtrl</name>
    <message>
        <source>加载通道模块 ....</source>
        <translation type="vanished">Loading Channel Module....</translation>
    </message>
    <message>
        <source>加载模板库 ....</source>
        <translation type="vanished">Loading Template Library....</translation>
    </message>
    <message>
        <source>加载检测设置模块 ....</source>
        <translation type="vanished">Load Detection Setup Module....</translation>
    </message>
    <message>
        <source>加载数据库 ....</source>
        <translation type="vanished">Load the database....</translation>
    </message>
    <message>
        <source>加载班次管理模块 ....</source>
        <translation type="vanished">Loading shift management module....</translation>
    </message>
    <message>
        <source>加载其他模块 ....</source>
        <translation type="vanished">Loading other modules....</translation>
    </message>
    <message>
        <source>创建子线程 ....</source>
        <translation type="vanished">Create subthreads....</translation>
    </message>
    <message>
        <source>加载光栅通讯模块 ....</source>
        <translation type="vanished">Loading grating communication module....</translation>
    </message>
    <message>
        <source>模块加载完成，启动线程 ....</source>
        <translation type="vanished">Module loading is completed and thread is started....</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/WheelCtrl.cpp" line="112"/>
        <source>未登录</source>
        <translation>None</translation>
    </message>
</context>
<context>
    <name>lpImageCaliUI</name>
    <message>
        <location filename="lpImageCaliUI.ui" line="14"/>
        <source>相机视场标定</source>
        <translation>Camera Standard</translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="31"/>
        <source>操作</source>
        <translation>Operator</translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="57"/>
        <source>选择标定图像</source>
        <translation>Select Image</translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="74"/>
        <source>P1_X：</source>
        <translation></translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="81"/>
        <source>P1_Y:</source>
        <translation></translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="88"/>
        <source>P2_Y:</source>
        <translation></translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="101"/>
        <location filename="lpImageCaliUI.ui" line="108"/>
        <location filename="lpImageCaliUI.ui" line="115"/>
        <location filename="lpImageCaliUI.ui" line="128"/>
        <source>1200</source>
        <translation>1200</translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="135"/>
        <source>P2_X:</source>
        <translation></translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="146"/>
        <source>两点实际距离mm：</source>
        <translation>2 Point DistanceL:</translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="156"/>
        <source>两点像素距离px：</source>
        <translation>2 Pixel Distance:</translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="166"/>
        <source>像素比例值(mm/px)：</source>
        <translation>scale(mm/px):</translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="193"/>
        <location filename="lpImageCaliUI.cpp" line="82"/>
        <location filename="lpImageCaliUI.cpp" line="168"/>
        <source>解锁</source>
        <translation>Unlock</translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="204"/>
        <source>物理X方向偏移：</source>
        <translation>Real X Offset:</translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="218"/>
        <source>物理Y方向偏移：</source>
        <translation>Real Y Offset:</translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="246"/>
        <source>应用</source>
        <translation>Apply</translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.ui" line="253"/>
        <source>退出</source>
        <translation>Close</translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.cpp" line="90"/>
        <source>Image Files (*.png *.jpg *.bmp)</source>
        <translation></translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.cpp" line="90"/>
        <source>选择标定图</source>
        <translation>Select Image</translation>
    </message>
    <message>
        <location filename="lpImageCaliUI.cpp" line="157"/>
        <source>上锁</source>
        <translation>Lock</translation>
    </message>
</context>
<context>
    <name>lpMainWin</name>
    <message>
        <location filename="lpMainWin.ui" line="14"/>
        <source>轮毂型号识别</source>
        <translation>Wheel model identification</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="142"/>
        <source>image_zoom.ui</source>
        <translation>image_zoom.ui</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="162"/>
        <source>状态信息</source>
        <translation>Status</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="275"/>
        <location filename="lpMainWin.cpp" line="1030"/>
        <source>开始检测</source>
        <translation>Start</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="299"/>
        <source>检测结果</source>
        <translation>Results</translation>
    </message>
    <message>
        <source>无匹配(个)</source>
        <translation type="vanished">No match</translation>
    </message>
    <message>
        <source>已检测(个)</source>
        <translation type="vanished">Detected</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="419"/>
        <source>匹配值</source>
        <translation>Score</translation>
    </message>
    <message>
        <source>直径(mm)</source>
        <translation type="vanished">Diameter (mm)</translation>
    </message>
    <message>
        <source>时间(s)</source>
        <translation type="vanished">Time(s)</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="347"/>
        <location filename="lpMainWin.ui" line="440"/>
        <location filename="lpMainWin.ui" line="477"/>
        <location filename="lpMainWin.ui" line="564"/>
        <location filename="lpMainWin.ui" line="629"/>
        <source>0</source>
        <translation>0</translation>
    </message>
    <message>
        <source>---------</source>
        <translation type="vanished">---------</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="367"/>
        <source>None</source>
        <translation>None</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="467"/>
        <location filename="lpMainWin.cpp" line="168"/>
        <source>检测状态</source>
        <translation>Detection status</translation>
    </message>
    <message>
        <source>厚度(mm)</source>
        <translation type="vanished">Thickness(mm)</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="688"/>
        <source>统计结果</source>
        <translation>Static</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="735"/>
        <source>modelID_detect</source>
        <translation>modelID_detect</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="735"/>
        <source>count</source>
        <translation>count</translation>
    </message>
    <message>
        <source>交换班清零</source>
        <translation type="vanished">Exchange class reset</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="711"/>
        <source>型号数量</source>
        <translation>Model Number</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="931"/>
        <source>模板管理</source>
        <translation>Model Manager</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="811"/>
        <source>数据查询</source>
        <translation>History</translation>
    </message>
    <message>
        <source>模板勾选</source>
        <translation type="vanished">Template selection</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="322"/>
        <source>0.0</source>
        <translation>0.0</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="499"/>
        <source>角度</source>
        <translation>Angle</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="509"/>
        <source>(0.0)</source>
        <translation></translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="519"/>
        <source>圆心坐标</source>
        <translation>Center</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="540"/>
        <source>定位结果</source>
        <translation>Result</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="579"/>
        <source>定位耗时</source>
        <translation>time</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="609"/>
        <source>识别耗时</source>
        <translation>time</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="619"/>
        <source>分数</source>
        <translation>Score</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="797"/>
        <source>型号管理</source>
        <translation>Model Manager</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="825"/>
        <source>检测勾选</source>
        <translation>Model Check</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="839"/>
        <source>辅助工具</source>
        <translation>Debg Tool</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="853"/>
        <source>班次设置</source>
        <translation>Classes Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="867"/>
        <source>光栅标定</source>
        <translation>Raster Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="881"/>
        <source>IP设置</source>
        <translation>IP Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="895"/>
        <location filename="lpMainWin.cpp" line="877"/>
        <source>关于</source>
        <translation>About</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="909"/>
        <source>登录</source>
        <translation>Login</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="923"/>
        <source>用户管理</source>
        <translation>User Management</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="937"/>
        <source>系统设置</source>
        <translation>System Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="951"/>
        <location filename="lpMainWin.cpp" line="955"/>
        <source>相机配置</source>
        <translation>Cam Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="965"/>
        <source>定位标定</source>
        <translation>Model Standard</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="974"/>
        <location filename="lpMainWin.cpp" line="982"/>
        <source>图像标定</source>
        <translation>Image Standard</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="988"/>
        <location filename="lpMainWin.ui" line="991"/>
        <source>注册产品</source>
        <translation>Register</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="1005"/>
        <location filename="lpMainWin.ui" line="1008"/>
        <source>算法设置</source>
        <translation>Algo Setting</translation>
    </message>
    <message>
        <source>加载必要模块.....</source>
        <translation type="vanished">Load the necessary modules.....</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="142"/>
        <location filename="lpMainWin.cpp" line="143"/>
        <source>工具</source>
        <translation>Tool</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="167"/>
        <source>系统时间</source>
        <translation>Time</translation>
    </message>
    <message>
        <source>班次信息</source>
        <translation type="vanished">Classes information</translation>
    </message>
    <message>
        <source>用户：</source>
        <translation type="vanished">User:</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="220"/>
        <source>历史</source>
        <translation>History</translation>
    </message>
    <message>
        <source>系统初始化完成...</source>
        <translation type="vanished">System initialization complete...</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="645"/>
        <source>显示识别结果</source>
        <translation>Show Results</translation>
    </message>
    <message>
        <source>相机图像和背景图不一样，请更换检测背景！</source>
        <translation type="vanished">The camera image is different from the background image, please change the detection background!</translation>
    </message>
    <message>
        <source>警告!!!连续出现%1个未识别型号</source>
        <translation type="vanished">Warning!!! %1 unidentified models appear continuously</translation>
    </message>
    <message>
        <source>,未开启检测功能造成的</source>
        <translation type="vanished">, Caused by not opening the detection function</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="662"/>
        <source>获得图像,正在计算中...</source>
        <translation>Detecting...</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="816"/>
        <source>注 销</source>
        <translation>Logout</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="821"/>
        <source>登 录</source>
        <translation>Login</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="841"/>
        <location filename="lpMainWin.cpp" line="868"/>
        <source>该功能未启用.</source>
        <translation>The feature is not enabled.</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="415"/>
        <location filename="lpMainWin.cpp" line="433"/>
        <location filename="lpMainWin.cpp" line="455"/>
        <location filename="lpMainWin.cpp" line="475"/>
        <location filename="lpMainWin.cpp" line="843"/>
        <location filename="lpMainWin.cpp" line="855"/>
        <location filename="lpMainWin.cpp" line="870"/>
        <location filename="lpMainWin.cpp" line="922"/>
        <location filename="lpMainWin.cpp" line="970"/>
        <source>确认</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="853"/>
        <source>你确定要注销</source>
        <translation>Are you sure you logout</translation>
    </message>
    <message>
        <source>班次管理</source>
        <translation type="vanished">Classes management</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="886"/>
        <source>调试工具</source>
        <translation>Debug Tool</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="943"/>
        <source>系统参数设置</source>
        <translation>System Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="244"/>
        <location filename="lpMainWin.cpp" line="1023"/>
        <source>停止检测</source>
        <translation>Stop</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="154"/>
        <location filename="lpMainWin.cpp" line="155"/>
        <source>帮助</source>
        <translation>Help</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="161"/>
        <location filename="lpMainWin.cpp" line="1921"/>
        <source>本系统未注册激活</source>
        <translation>The System don&apos;t Active</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="169"/>
        <source>用户:</source>
        <translation>User:</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="413"/>
        <source>Corectrl模块加载失败,请检查!</source>
        <translation>Corectrl model load failed,please Check Error!</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="431"/>
        <source>camera.json文件出错,请检查!</source>
        <translation>camera.json is Failed,please Check Error!</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="453"/>
        <source>lpbengine模块加载失败,请检查!</source>
        <translation>lpbengine model load failed,please Check Error!</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="473"/>
        <source>lpdesigner模块加载失败,请检查!</source>
        <translation>lpdesigner model load failed,please Check Error!</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="920"/>
        <location filename="lpMainWin.cpp" line="968"/>
        <source>请停止检测再使用该功能.</source>
        <translation>Please Stop Detect,and then Use this.</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="994"/>
        <source>注册</source>
        <translation>Register</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1006"/>
        <source>算法参数</source>
        <translation>Algo Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1024"/>
        <source>按下了开始检测按钮，检测功能开启</source>
        <translation>Press the start detection button, the detection function is turned on</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1031"/>
        <source>按下了停止检测按钮，检测功能关闭</source>
        <translation>Press the stop detection button, the detection function is closed</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1340"/>
        <source>轮毂型号识别定位一体系统</source>
        <translation>Hub model identification and positioning system</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1775"/>
        <location filename="lpMainWin.cpp" line="1805"/>
        <source>后台运行</source>
        <translation>Run Background</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1776"/>
        <source>退出</source>
        <translation>Exit</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1808"/>
        <source>显示界面</source>
        <translation>Show Widget</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="413"/>
        <location filename="lpMainWin.cpp" line="431"/>
        <location filename="lpMainWin.cpp" line="453"/>
        <location filename="lpMainWin.cpp" line="473"/>
        <location filename="lpMainWin.cpp" line="841"/>
        <location filename="lpMainWin.cpp" line="853"/>
        <location filename="lpMainWin.cpp" line="868"/>
        <location filename="lpMainWin.cpp" line="920"/>
        <location filename="lpMainWin.cpp" line="968"/>
        <location filename="lpMainWin.cpp" line="1038"/>
        <source>提示</source>
        <translation>Info</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1038"/>
        <source>将清空所有数据</source>
        <translation>All data will be cleared</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1039"/>
        <source>确定</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="856"/>
        <location filename="lpMainWin.cpp" line="1040"/>
        <source>取消</source>
        <translation>Cancel</translation>
    </message>
    <message>
        <source>当前曝光时间未识别到轮毂！</source>
        <translation type="vanished">The current exposure time does not recognize the hub！</translation>
    </message>
    <message>
        <source>调整5次曝光时间后依然未能识别到轮毂！</source>
        <translation type="vanished">After adjusting the exposure time for 5 times, the wheel hub is still not recognized！</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1043"/>
        <source>按下了清零按钮，数据全部清零</source>
        <translation>Press the reset button, all data are cleared</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1054"/>
        <source>天</source>
        <translation>d</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1055"/>
        <source>时</source>
        <translation>h</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1056"/>
        <source>分</source>
        <translation>m</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1057"/>
        <source>秒</source>
        <translation>s</translation>
    </message>
    <message>
        <source>系统时间:</source>
        <translation type="vanished">System time:</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1080"/>
        <source>运行时长:</source>
        <translation>Run:</translation>
    </message>
    <message>
        <source>检测状态:</source>
        <translation type="vanished">Status:</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1087"/>
        <source>检测中...</source>
        <translation>Detecting...</translation>
    </message>
    <message>
        <source>未检测...</source>
        <translation type="vanished">Not detected...</translation>
    </message>
    <message>
        <source>班次信息：</source>
        <translation type="vanished">Classes info:</translation>
    </message>
    <message>
        <source>该时间段未设置班次</source>
        <translation type="vanished">No classes</translation>
    </message>
    <message>
        <source>当前用户：</source>
        <translation type="vanished">Current user:</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1087"/>
        <source>已停止检测...</source>
        <translation>Stopping...</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1147"/>
        <location filename="lpMainWin.cpp" line="1159"/>
        <source>正在检测型号数</source>
        <translation>Models</translation>
    </message>
    <message>
        <source>已连接</source>
        <translation type="vanished">Connected</translation>
    </message>
    <message>
        <source>已断开</source>
        <translation type="vanished">Disconnected</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1208"/>
        <source>PLC已收到相关设置参数！</source>
        <translation>The PLC has received the relevant setting parameters!</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1250"/>
        <source>已打开</source>
        <translation>Opened</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1252"/>
        <source>已关闭</source>
        <translation>Closed</translation>
    </message>
    <message>
        <source>轮毂型号识别系统</source>
        <translation type="vanished">Wheel Type Identification System</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1341"/>
        <source>本软件由杭州利珀科技开发，用于轮毂型号识别和分类，可搭配流水线运输系统使用</source>
        <translation>This software is developed by Leaper  in Hangzhou. It is used for hub type identification and classification. It can be used with pipeline transportation system</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1342"/>
        <source>若需要进一步了解该产品的相关信息，请访问我们的网站</source>
        <translation>For more information about this product, please visit our website</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1343"/>
        <source>软件版本</source>
        <translation>Software Version</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1344"/>
        <source>算法版本</source>
        <translation>Algorithm Version</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1345"/>
        <source>最后更新时间</source>
        <translation>Last update time</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1346"/>
        <source>版权 (c) 属 杭州利珀科技有限公司 所有</source>
        <translation>Copyright(C) belongs to Hangzhou Lipper Technology Company</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1355"/>
        <source>关闭</source>
        <translation>Shut down</translation>
    </message>
    <message>
        <source>(默认)</source>
        <translation type="vanished">(Default)</translation>
    </message>
    <message>
        <source>默认通道 值1000</source>
        <translation type="vanished">1000 (Default)</translation>
    </message>
</context>
<context>
    <name>lpSystemConfigUI</name>
    <message>
        <location filename="lpSystemConfigUI.ui" line="14"/>
        <source>lpSystemConfigUI</source>
        <translation></translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="117"/>
        <source>系统语言设置：</source>
        <translation>Change Language:</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="125"/>
        <source>语言</source>
        <translation>Language</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="153"/>
        <source>图像保存相关：</source>
        <translation>Image Save Params:</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="159"/>
        <source>是否保存识别NG抠图</source>
        <translation>Save NG Cut Image</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="166"/>
        <source>是否保存识别OK抠图</source>
        <translation>Save OK Cut Image</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="173"/>
        <source>是否保存识别NG原始图</source>
        <translation>Save NG Src Image</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="180"/>
        <source>是否保存识别OK原始图</source>
        <translation>Save OK Src Image</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="187"/>
        <source>是否保存定位NG原始图</source>
        <translation>Save NG Position Image</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="194"/>
        <source>是否保存定位OK原始图</source>
        <translation>Save OK Position Image</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="203"/>
        <source>图像存储路径：</source>
        <translation>Image Save Path:</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="213"/>
        <source>设置</source>
        <translation>Set</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="40"/>
        <source>通讯配置：</source>
        <translation>Connection:</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="48"/>
        <source>TCP服务端口：</source>
        <translation>TcpServer Port:</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="76"/>
        <source>其他：</source>
        <translation>Others:</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="84"/>
        <source>本系统标题：</source>
        <translation>Title:</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="98"/>
        <source>启动时默认后台运行</source>
        <translation>Auto Run Background</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="105"/>
        <source>关闭主窗口时在后台运行</source>
        <translation>Run Background when Close</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="244"/>
        <source>系统参数已保存且生效！！！</source>
        <translation>Apply Successful!!</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="269"/>
        <source>应用</source>
        <translation>Apply</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.ui" line="281"/>
        <source>退出</source>
        <translation>Close</translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.cpp" line="17"/>
        <source>Chinese</source>
        <translation></translation>
    </message>
    <message>
        <location filename="lpSystemConfigUI.cpp" line="18"/>
        <source>English</source>
        <translation></translation>
    </message>
</context>
</TS>