CChannelInfo开始读取json文件数据...Reading json's file data...数据读取完成...Read complete...CWheelNetIP参数设置IP SettingIP SettingModelsModel型号ModelModel数量NumNumProgressView取消CancelCancelQAddChannelDlg新建通道Add New ChannelAdd New Channel发送结果：Results:Results:通道名称：Name:Name:备注：About:About:确认OKOK取消CancelCancel警告WarningWarning数据不能为空，请输入Data cannot be empty, please enterData cannot be empty, please enterQAddModel新建模板Add New ModelAdd New Model轮毂信息：Hub Info:Hub Info:轮毂型号NameName00直径(mm)Diameter厚度(mm)ThicknessThickness旋转次数Rotate确定OKOK取消CancelCancel提醒WarningWarning信息不能为空！The message cannot be empty!The message cannot be empty!QAddTimeDlg时间参数设置Time Setting确认OK取消Cancel时间参数：Time Info:起始时间Start班次名称：Name:hh:mmhh:mm结束时间End当天Same day隔天Text dayQAlgParamDlg算法参数设置Algo Setting二级圆定位:Circle Param:边缘宽度：Edge Width:从深到浅Dark to Write从浅到深Write to Dark边缘对比度：AC Thres:边缘转换：Polarity:圆半径大小过滤：Circle Filter Size:检测背景图更换:Background Image:查看检测背景Check Background是否使用图像增强Use Image Enhancement是否使用背景图找圆算法Use Background Algo型号匹配：Model Match:是否使用偏距过滤模板Use Offset to Filter Model应用Apply退出Close参数已生效！！！Apply Success!!!请选择您的背景图Please select your background map提示Info背景图更新完成，请重启本软件.Background image updated, please restart this software.确认OKQCamSettingDlg相机配置Camera Config序列号：Serial:显示名称：Name:相机类型：Type:虚拟相机Virtual海康相机HIK堡盟相机Baumer路径：Path:设置Setting图像高度：Height:Gray8Gray8RGB32RGB32图像宽度：Width:setset图像格式：Format:增益：Gain:曝光：Exposure：内触发Internal外触发External软触发Soft打开Open触发Trigger关闭CloseQChannelManager通道信息管理Channel MamagerChannel Mamager所有通道数据All channel InfoAll channel Info发送结果：Result:Result:通道名称：Name:Name:备注：About:About:是否设为默认（NG流向的通道）Set to defaultSet to default确认修改OKOK退出Cancel编号Num通道名Name备注About发送结果Result是否为默认Is dafault默认DefaultQChannelMgrDlgQChannelMgrDlgQChannelMgrDlg所有型号及图像All models and images型号：Model:通道：Channer:查找：Find:隐藏Hide修改Modify00通道分配：Channel assignment:删除通道Delete channel增加通道Add channel刷新Refresh通道管理Channel managementQCryptokeyUI注册Register退出Close机器码：MachineID:注册码：License:激活Active请输入注册码Please input Licese激活状态：State:未激活No Active提示Info注册码不匹配,请重新输入No Match,Please Input the New One已激活Active系统激活完成the System Active FinishQDebugDlgQDebugDlgQDebugDlg<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'SimSun'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">右侧是算法裁剪后的图像、匹配的型号、算法匹配的最小阈值、匹配模板对应的直径和厚度（新建模板时输入的）</p></body></html><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'SimSun'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On the right is the image cropped by the algorithm, the matched model, the minimum threshold for algorithm matching, and the diameter and thickness of the matching template.(Input when creating a new template)</p></body></html>0000000000000.00.0厚度mm:Thickness(mm):00直径mm：Diameter(mm):开始模拟检测Continus采集一张Signal停止StopQDia2ThSetting直径标定Diameter StandardK:表示斜率，B：基准点，直径=高度*K+BK: rate, B: base point, Diameter = H * K + B确认修改OK退出CancelB：B:K:K:提示Warning修改完成，参数已生效！The modification is completed and the parameters are in effect!确定OKQIPConfigDlgQIPConfigDlgQIPConfigDlg本机服务器IP地址设置Server address SettingsIP 地址(I)：Address：关闭服务Close Server开放端口：Port:打开服务Open Server目标客户端IP地址设置Client Address Settings源端口：Port:确定OKQModNamedlg模板名修改Model Name modify确认修改Apply取消Cancel缩略图：Image:TextLabelTextLabel旧型号名：Old Name:新型号名：New Name:提示Prompt新型号名不能为空！The new name can't be empty!型号库中已包含该型号，请重新设置型号名！The model has been included in the model library. Please reset the model name!确认OKQModelMgrDlgQModelMgrDlgQModelMgrDlg轮毂信息：Model Info:型号Name0%0%阈值调节Threshold严格Strict旋转次数Rotate缩略图Thumbnail宽松Easy厚度(mm)Thickness(mm)直径(mm)Diameter(mm)加入训练Add to train最小偏距Min Offset最大偏距Max Offset基本操作Basic operation删除模板Delete训练当前模板Training训练模板Train添加新的模板Add new新建模板New训练所有模板，消耗时间会较长Training all templates will take longer训练全部Train all确认修改，每次修改模板的参数后都要确认修改才有效Confirm the modification, every time you modify the parameters of the template, you must confirm the modification to be effective修改确认Modify修改型号名Modify Name图片显示：Images:TextLabelTextLabel添加已裁剪的轮毂图片Add cropped wheel image追加Add删除所有模板Del All模板型号查询Models查找：Find:数量QuantitymodelIDmodelID提示Prompt请选择一个您要追加图像的型号！Please select a model you want to add an image to!加载图像Load image图像加载中,请稍后.....The image is loading, please wait...添加失败，不能添加带检测背景的图片作为模板！！！Failed to add, you cannot add a picture with a detection background as a template! ! !加载完成Download finished请选择一个您要修改的型号！Please select a model you want to modify!修改了模板Modified template的参数The parameters of the修改成功！Modified Successfully!请选择一个您要删除的型号Please select a model you want to delete按下了删除模板按钮Press the Delete Template button是否删除型号Whether to delete the model产品模板Product template删除了模板Template deleted共with个型号Modelsnumber按下了添加模板按钮Press the Add Template button产品信息设置Product information settings添加了一个新的模型Added a new model请选择一个您要训练的型号！Please select a model you want to train!训练模板线程未退出，请稍等The training template thread did not exit, please wait将对所有型号模板进行重新训练，期间系统的检测功能将不能正常运行直到模板训练完成，全部重新训练模板将需要很长时间，期间将不能进行其他工作，是否继续执行？All model templates will be retrained. During this period, the system's detection function will not operate normally until the template training is completed. It will take a long time for all templates to be retrained, during which other work will not be possible. Do you want to continue?确定删除该图像?Determine to delete the image?模板图片删除Template picture deletion个图像Images警告Warning即将删除模板库里的所有模板，是否继续？All templates in the template library will be deleted. Do you want to continue?再次确认，是否全部删除？Confirm again, delete all?没有模板!!!No Model!!!全部删除完成!!!Complete deletion!!!图像数量少于The number of images is less than个,请及时补充训练样本please supplement Images模板更新进度Template update progress正在初始化所有模板 共需要训练%1个模板,请稍后.....All templates are being initialized. A total of%1 templates need to be trained. Please wait a moment...正在训练%1的模板 已完成%2/%3,请稍后.....The template training %1 is complete %2/%3, please wait...%1的模板获取特征 已完成%2/%3,请稍后.....Template capture feature for %1 is complete for %2/%3, please wait...%1的模板训练完成 已完成%2/%3,请稍后.....Template training for %1 completed %2/%3, please wait...全部模板更新完成！%1sAll templates updated!The %1 s对全部模板进行了重新训练，共%1个模板All templates were retrained, with a total of%1 template模板正在准备请稍后.....The Model is being prepared Please wait a moment.....模板训练进度Training progress%1型号没有图片不能训练！%1 can not be trained without images!%1的模板 正在获取特征值,请稍后....The %1 is getting the feater value. Please wait...训练完成！%1sTraining completed! %1s训练了模板:%1Model training:%1确认OK取消CancelQMySplashScreen程序正在启动...The program is starting...QObject虚拟相机触发Virtual Camera硬件相机触发Hardware Camera调试免登陆Debugging free login正常工作模式Normal working mode传感器触发Sensor trigger软件触发Software trigger下降沿触发Falling上升沿触发Rising警告Warning本检测系统正在运行，您真的要关闭？Are you sure quit the System?确定OK取消NOQSettingDlgQSettingDlgQSettingDlgQShowImg检测背景图像显示Background display退出Exit我要更换背景Change backgroundpicpic没有用于检测的背景图，请更换检测背景There is no background image for testing. Please change the testing backgroundQSystemSettingDlg相关设备配置Device Setting检测图像设置Image SettingsPLC相关设置PLC Settings报警灯测试Alarm Test高级功能Developer属性Property值Value语言Language检测背景更换Background抠图后After cutout原图SourceImage背景图Background检测结果Result图像保存路径Image Save Path设置保存路径Save path打开图像路径Open Image Path保存当前设置Save current settings保存已匹配图Save matched Image保存无匹配图Save Unmatched Image使用背景图Use background轮毂全去A通道Hub All-to-A Channel查看检测背景Check Background保存参数Save Parameters保存设置Save Settings传感器触发滤波(ms)Sensor filtering (ms)相机触发延时(ms)Sensor filtering (ms)相机触发脉宽(ms)Camera width (ms)光源熄灭延时时间(ms)Light delay time (ms)传感器触发类型Sensor trigger type保持结果时长(ms)Result hold Times (ms)连接超时次数Connection timeouts超时是否显示信息Display information是否自动重启服务器Auto restart servering是否保存超时日志Save timeout log发送并保存Send and save超时提醒n次后自动重启服务Automatically restart service after n timeout reminders是否显示提示Display Warning勾选后通信超时时会显示提醒信息Reminder message will be displayed when communication timeout occurs after checking勾选后通信超时次数达到后，系统将自动重启服务，PLC会自动重新连接After checking the number of communication timeouts reached, the system will automatically restart the service, and the PLC will automatically reconnect保存信息到系统日志Save information to system log勾选后表示超时信息将自动保存到系统日志中，便于查询Check to indicate that the timeout information will be automatically saved to the system log for easy query红灯Red light绿灯Green light黄灯Yellow light蜂鸣Buzzing红灯闪一下Red light flashed绿灯闪一下Green light flashed黄灯闪一下Yellow light flashed蜂鸣响一下Bee rings开发者使用Developers use相机模式Camera mode虚拟相机触发时间Trigger times系统模式System mode相机触发模式Trigger mode串口发送心跳包Serial Port网络发送心跳包Network串口发送通道结果Serial Port网络发送检测结果Network网络发送通道结果Network光栅使用标志Rester保存高度厚度数据Data通道分配Channel allocate启动时是否检测Whether to detect at startup显示厚度数据Display thickness data显示厚度采样数据Display thickness sampling data使用光栅获取厚度Acquiring Thickness by Grating保存数据用于测试Save data for testing是否使用通道分配Whether to use channel allocation or not是否启动就开始检测Start checking if it's started是否显示Whether to display保存Save请选择您的背景图Please select your background map提示InfoWarning背景图更新完成，请重启本软件.Background image updated, please restart this software.确认OK打开文件夹Open folderQSystemSettingUI系统设置System settings参数设置已生效！！！Apply Successful!!!QTimeMgrDlg班次管理Classes management未选中UnSelect添加时间Add删除时间Delete修改时间Modify班次Classes起始时间Start结束时间End设置参数Setting parameters当天Same day隔天Next day提示Prompt未选择班次，请选择进行修改。No classes is selected, please select to modify.确认Ok您确定要删除 %1 班次？Are you sure you want to delete the %1 classes?取消CanncelQWorkItemDlg工单信息设置Work List information setting警告Warning名称不能为空.The name cannot be empty.你输入的名称:%1 重复.The name :%1 repeat.QWorkItemUI信息设置Information setup确定Ok取消Cancel备注信息：Note information:名称：Name:QWorkMgrUIQWorkMgrUIQWorkMgrUI检测配置任务表Model Check工作任务表Table List添加任务单Add Table添加Add删除任务单Delete Table List删除Del修改任务单名称或备注信息Modify Table List Name or Note Information修改Mod使用任务单Set Use应用Use当前选择的任务表：Current Table：数量Num添加型号到检测列表Add model to table<<<<<<从检测列表移除所选型号Remove the selected model from the table>>>>>>缩略图Image只看已选Selected只看未选Unselected显示全部Show all查找：Find:其他Others按照直径检测By diameter按照厚度检测By thickness手动发送模板库Send Models检测模板管理Detection Model Management共 %1 个Total of: %1当前使用的工单为 %1 The current Table is%1 以下型号为重复添加：
%1已被忽略.The models are added repeatedly:%1, And They have been ignored.提醒Warning确定OK工单 %1 被设为应用Table %1 is seted to Using发送模板库Send Template Library警告Warning%1任务单正在使用不能被删除,请先切换到其他任务单,再删除该任务单？%1 Table is Using and cannot be deleted. Please switch to another Table before deleting the Table?取消Cancel是否要删除 %1 模型？Do you want to delete the%1 model?序号Num内容AboutRoiImgViewerline item is not createdline item is not createdline item is already createdline item is already createdrect item is already createdrect item is already createdWheelCtrl加载通道模块 ....Loading Channel Module....加载模板库 ....Loading Template Library....加载检测设置模块 ....Load Detection Setup Module....加载数据库 ....Load the database....加载班次管理模块 ....Loading shift management module....加载其他模块 ....Loading other modules....创建子线程 ....Create subthreads....加载光栅通讯模块 ....Loading grating communication module....模块加载完成，启动线程 ....Module loading is completed and thread is started....未登录NonelpMainWin轮毂型号识别Model Detector Applicationimage_zoom.uiimage_zoom.ui状态信息Status开始检测Start检测结果Results无匹配(个)No match已检测(个)Detected匹配值Score直径(mm)Diameter时间(s)Time(s)通道Channel00------------------NoneNone检测状态Detect State厚度(mm)Thickness偏距Offset统计结果StaticmodelID_detectmodelID_detectcountcount交换班清零Clear型号数量Number模板管理Model Manager数据查询History模板勾选Model Check辅助工具Test Tool班次设置Class Setting光栅标定Raster SettingIP设置IP Setting关于About登录Login用户管理User Manager系统设置System Setting相机配置Cam Setting算法设置Algo Setting注册产品Registerer加载必要模块.....Load the necessary modules.....工具Tool帮助Help本系统未注册激活The system is not activated系统时间Time班次信息Class Info用户：User:历史History系统初始化完成...System initialization complete...显示识别结果Display Result相机图像和背景图不一样，请更换检测背景！The camera image is different from the background image, please change the detection background!警告!!!连续出现%1个未识别型号Warning!!! %1 unidentified models appear continuously,未开启检测功能造成的, Caused by not opening the detection function获得图像,正在计算中...Calculating...注 销Logout登 录Login该功能未启用.The feature is not enabled.确认Ok你确定要注销Are you sure you want to log out班次管理Classes Manager调试工具Test Tool算法参数Algo Setting请停止检测再使用该功能.Please Stop Detecting .系统参数设置System Setting停止检测Stop按下了开始检测按钮，检测功能开启Press the start detection button, the detection function is turned on按下了停止检测按钮，检测功能关闭Press the stop detection button, the detection function is closed提示Info将清空所有数据Are you sure Clear the Static确定OK取消NO用户:User:PLC连接PLC State当前曝光时间未识别到轮毂！The current exposure time does not recognize the hub！调整5次曝光时间后依然未能识别到轮毂！After adjusting the exposure time for 5 times, the wheel hub is still not recognized！注册Register按下了清零按钮，数据全部清零Press the reset button, all data are cleared天D时H分M秒S系统时间:System time:运行时长:Time:检测状态:Status:检测中...Detecting...未检测...Not Detected...班次信息：Classes info:该时间段未设置班次No Classes当前用户：Current user:班次信息:Class:当前用户:User:PLC已连接PLC ConnectPLC未连接PLC Disconnect模板库发送完成Template library sending completed正在检测型号数Number of models已连接Connected已断开DisconnectedPLC已收到相关设置参数！The PLC has received the relevant setting parameters!已打开Opened已关闭Closed轮毂型号识别系统Wheel Model Identification System本软件由杭州利珀科技开发，用于轮毂型号识别和分类，可搭配流水线运输系统使用This software is developed by Leaper in Hangzhou. It is used for hub type identification and classification. It can be used with pipeline transportation system若需要进一步了解该产品的相关信息，请访问我们的网站For more information about this product, please visit our website软件版本Software Version算法版本Algorithm Version最后更新时间Last update time版权 (c) 属 杭州利珀科技有限公司 所有Copyright(C) belongs to Hangzhou Leaper Technology company关闭Shut down(默认)(Default)默认通道 值10001000 (Default)