wheeldetect/tpvs17/tpMain/lpmain_en.ts

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="en_US">
<context>
    <name>CChannelInfo</name>
    <message>
        <location filename="../../src/tpMain/ChannelInfo.cpp" line="20"/>
        <source>开始读取json文件数据...</source>
        <translation>Reading json&apos;s file data...</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/ChannelInfo.cpp" line="26"/>
        <source>数据读取完成...</source>
        <translation>Read complete...</translation>
    </message>
</context>
<context>
    <name>CWheelNet</name>
    <message>
        <location filename="../../src/tpMain/WheelNet.cpp" line="137"/>
        <source>IP参数设置</source>
        <translatorcomment>IP Setting</translatorcomment>
        <translation>IP Setting</translation>
    </message>
</context>
<context>
    <name>ModelsModel</name>
    <message>
        <location filename="../../src/tpMain/ModelTableView.cpp" line="41"/>
        <location filename="../../src/tpMain/ModelTableView.cpp" line="44"/>
        <source>型号</source>
        <translatorcomment>Model</translatorcomment>
        <translation>Model</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/ModelTableView.cpp" line="47"/>
        <source>数量</source>
        <translatorcomment>Num</translatorcomment>
        <translation>Num</translation>
    </message>
</context>
<context>
    <name>ProgressView</name>
    <message>
        <location filename="../../src/tpMain/ProgressView.cpp" line="56"/>
        <source>取消</source>
        <translatorcomment>Cancel</translatorcomment>
        <translation>Cancel</translation>
    </message>
</context>
<context>
    <name>QAddChannelDlg</name>
    <message>
        <location filename="../../src/tpMain/qaddchanneldlg.ui" line="14"/>
        <source>新建通道</source>
        <translatorcomment>Add New Channel</translatorcomment>
        <translation>Add New Channel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddchanneldlg.ui" line="25"/>
        <source>发送结果：</source>
        <translatorcomment>Results:</translatorcomment>
        <translation>Results:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddchanneldlg.ui" line="32"/>
        <source>通道名称：</source>
        <translatorcomment>Name:</translatorcomment>
        <translation>Name:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddchanneldlg.ui" line="62"/>
        <source>备注：</source>
        <translatorcomment>About:</translatorcomment>
        <translation>About:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddchanneldlg.ui" line="89"/>
        <source>确认</source>
        <translatorcomment>OK</translatorcomment>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddchanneldlg.ui" line="105"/>
        <source>取消</source>
        <translatorcomment>Cancel</translatorcomment>
        <translation>Cancel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddchanneldlg.cpp" line="37"/>
        <source>警告</source>
        <translatorcomment>Warning</translatorcomment>
        <translation>Warning</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddchanneldlg.cpp" line="37"/>
        <source>数据不能为空，请输入</source>
        <translatorcomment>Data cannot be empty, please enter</translatorcomment>
        <translation>Data cannot be empty, please enter</translation>
    </message>
</context>
<context>
    <name>QAddModel</name>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="14"/>
        <source>新建模板</source>
        <translatorcomment>Add New Model</translatorcomment>
        <translation>Add New Model</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="32"/>
        <source>轮毂信息：</source>
        <translatorcomment>Hub Info:</translatorcomment>
        <translation>Hub Info:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="75"/>
        <source>轮毂型号</source>
        <translatorcomment>Name</translatorcomment>
        <translation>Name</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="91"/>
        <location filename="../../src/tpMain/qaddmodel.ui" line="124"/>
        <location filename="../../src/tpMain/qaddmodel.ui" line="150"/>
        <source>0</source>
        <translation>0</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="98"/>
        <source>直径(mm)</source>
        <translation>Diameter</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="108"/>
        <source>厚度(mm)</source>
        <translatorcomment>Thickness</translatorcomment>
        <translation>Thickness</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="131"/>
        <source>旋转次数</source>
        <translation>Rotate</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="166"/>
        <source>确定</source>
        <translatorcomment>OK</translatorcomment>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.ui" line="185"/>
        <source>取消</source>
        <translatorcomment>Cancel</translatorcomment>
        <translation>Cancel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.cpp" line="41"/>
        <source>提醒</source>
        <translatorcomment>Warning</translatorcomment>
        <translation>Warning</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddmodel.cpp" line="41"/>
        <source>信息不能为空！</source>
        <translatorcomment>The message cannot be empty!</translatorcomment>
        <translation>The message cannot be empty!</translation>
    </message>
</context>
<context>
    <name>QAddTimeDlg</name>
    <message>
        <location filename="../../src/tpMain/qaddtimedlg.ui" line="14"/>
        <source>时间参数设置</source>
        <translation>Time Setting</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddtimedlg.ui" line="43"/>
        <source>确认</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddtimedlg.ui" line="62"/>
        <source>取消</source>
        <translation>Cancel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddtimedlg.ui" line="71"/>
        <source>时间参数：</source>
        <translation>Time Info:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddtimedlg.ui" line="86"/>
        <source>起始时间</source>
        <translation>Start</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddtimedlg.ui" line="103"/>
        <source>班次名称：</source>
        <translation>Name:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddtimedlg.ui" line="136"/>
        <location filename="../../src/tpMain/qaddtimedlg.ui" line="185"/>
        <source>hh:mm</source>
        <translation>hh:mm</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddtimedlg.ui" line="155"/>
        <source>结束时间</source>
        <translation>End</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddtimedlg.ui" line="199"/>
        <location filename="../../src/tpMain/qaddtimedlg.ui" line="219"/>
        <source>当天</source>
        <translation>Same day</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qaddtimedlg.ui" line="204"/>
        <location filename="../../src/tpMain/qaddtimedlg.ui" line="224"/>
        <source>隔天</source>
        <translation>Text day</translation>
    </message>
</context>
<context>
    <name>QAlgParamDlg</name>
    <message>
        <location filename="QAlgParamDlg.ui" line="14"/>
        <source>算法参数设置</source>
        <translation>Algo Setting</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="27"/>
        <source>二级圆定位:</source>
        <translation>Circle Param:</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="50"/>
        <source>边缘宽度：</source>
        <translation>Edge Width:</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="75"/>
        <source>从深到浅</source>
        <translation>Dark to Write</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="80"/>
        <source>从浅到深</source>
        <translation>Write to Dark</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="93"/>
        <source>边缘对比度：</source>
        <translation>AC Thres:</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="105"/>
        <source>边缘转换：</source>
        <translation>Polarity:</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="135"/>
        <source>圆半径大小过滤：</source>
        <translation>Circle Filter Size:</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="185"/>
        <source>检测背景图更换:</source>
        <translation>Background Image:</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="197"/>
        <source>查看检测背景</source>
        <translation>Check Background</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="211"/>
        <source>是否使用图像增强</source>
        <translation>Use Image Enhancement</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="223"/>
        <source>是否使用背景图找圆算法</source>
        <translation>Use Background Algo</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="235"/>
        <source>型号匹配：</source>
        <translation>Model Match:</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="246"/>
        <source>是否使用偏距过滤模板</source>
        <translation>Use Offset to Filter Model</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="278"/>
        <source>应用</source>
        <translation>Apply</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="290"/>
        <source>退出</source>
        <translation>Close</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.ui" line="299"/>
        <source>参数已生效！！！</source>
        <translation>Apply Success!!!</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.cpp" line="105"/>
        <source>请选择您的背景图</source>
        <translation>Please select your background map</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.cpp" line="134"/>
        <source>提示</source>
        <translation>Info</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.cpp" line="134"/>
        <source>背景图更新完成，请重启本软件.</source>
        <translation>Background image updated, please restart this software.</translation>
    </message>
    <message>
        <location filename="QAlgParamDlg.cpp" line="136"/>
        <source>确认</source>
        <translation>OK</translation>
    </message>
</context>
<context>
    <name>QCamSettingDlg</name>
    <message>
        <location filename="QCamSettingDlg.ui" line="14"/>
        <source>相机配置</source>
        <translation>Camera Config</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="185"/>
        <source>序列号：</source>
        <translation>Serial:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="119"/>
        <source>显示名称：</source>
        <translation>Name:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="140"/>
        <source>相机类型：</source>
        <translation>Type:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="153"/>
        <source>虚拟相机</source>
        <translation>Virtual</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="158"/>
        <source>海康相机</source>
        <translation>HIK</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="163"/>
        <source>堡盟相机</source>
        <translation>Baumer</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="206"/>
        <source>路径：</source>
        <translation>Path:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="227"/>
        <source>设置</source>
        <translation>Setting</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="339"/>
        <source>图像高度：</source>
        <translation>Height:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="373"/>
        <source>Gray8</source>
        <translation>Gray8</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="378"/>
        <source>RGB32</source>
        <translation>RGB32</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="275"/>
        <source>图像宽度：</source>
        <translation>Width:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="192"/>
        <location filename="QCamSettingDlg.ui" line="251"/>
        <location filename="QCamSettingDlg.ui" line="318"/>
        <source>set</source>
        <translation>set</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="360"/>
        <source>图像格式：</source>
        <translation>Format:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="263"/>
        <source>增益：</source>
        <translation>Gain:</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="296"/>
        <source>曝光：</source>
        <translation>Exposure：</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="68"/>
        <source>内触发</source>
        <translation>Internal</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="73"/>
        <source>外触发</source>
        <translation>External</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="78"/>
        <source>软触发</source>
        <translation>Soft</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="91"/>
        <location filename="QCamSettingDlg.cpp" line="109"/>
        <location filename="QCamSettingDlg.cpp" line="152"/>
        <source>打开</source>
        <translation>Open</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.ui" line="103"/>
        <source>触发</source>
        <translation>Trigger</translation>
    </message>
    <message>
        <location filename="QCamSettingDlg.cpp" line="105"/>
        <location filename="QCamSettingDlg.cpp" line="149"/>
        <location filename="QCamSettingDlg.cpp" line="159"/>
        <source>关闭</source>
        <translation>Close</translation>
    </message>
</context>
<context>
    <name>QChannelManager</name>
    <message>
        <location filename="../../src/tpMain/qchannelmanager.ui" line="14"/>
        <source>通道信息管理</source>
        <translatorcomment>Channel Mamager</translatorcomment>
        <translation>Channel Mamager</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qchannelmanager.ui" line="35"/>
        <source>所有通道数据</source>
        <translatorcomment>All channel Info</translatorcomment>
        <translation>All channel Info</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qchannelmanager.ui" line="74"/>
        <source>发送结果：</source>
        <translatorcomment>Result:</translatorcomment>
        <translation>Result:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qchannelmanager.ui" line="81"/>
        <source>通道名称：</source>
        <translatorcomment>Name:</translatorcomment>
        <translation>Name:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qchannelmanager.ui" line="101"/>
        <source>备注：</source>
        <translatorcomment>About:</translatorcomment>
        <translation>About:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qchannelmanager.ui" line="111"/>
        <source>是否设为默认（NG流向的通道）</source>
        <translatorcomment>Set to default</translatorcomment>
        <translation>Set to default</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qchannelmanager.ui" line="130"/>
        <source>确认修改</source>
        <translatorcomment>OK</translatorcomment>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qchannelmanager.ui" line="152"/>
        <source>退出</source>
        <translation>Cancel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qchannelmanager.cpp" line="20"/>
        <source>编号</source>
        <translation>Num</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qchannelmanager.cpp" line="21"/>
        <source>通道名</source>
        <translation>Name</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qchannelmanager.cpp" line="22"/>
        <source>备注</source>
        <translation>About</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qchannelmanager.cpp" line="23"/>
        <source>发送结果</source>
        <translation>Result</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qchannelmanager.cpp" line="24"/>
        <source>是否为默认</source>
        <translation>Is dafault</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qchannelmanager.cpp" line="133"/>
        <source>默认</source>
        <translation>Default</translation>
    </message>
</context>
<context>
    <name>QChannelMgrDlg</name>
    <message>
        <location filename="QChannelMgrDlg.ui" line="14"/>
        <source>QChannelMgrDlg</source>
        <translation>QChannelMgrDlg</translation>
    </message>
    <message>
        <location filename="QChannelMgrDlg.ui" line="29"/>
        <source>所有型号及图像</source>
        <translation>All models and images</translation>
    </message>
    <message>
        <location filename="QChannelMgrDlg.ui" line="97"/>
        <source>型号：</source>
        <translation>Model:</translation>
    </message>
    <message>
        <location filename="QChannelMgrDlg.ui" line="113"/>
        <source>通道：</source>
        <translation>Channer:</translation>
    </message>
    <message>
        <location filename="QChannelMgrDlg.ui" line="128"/>
        <source>查找：</source>
        <translation>Find:</translation>
    </message>
    <message>
        <location filename="QChannelMgrDlg.ui" line="158"/>
        <location filename="QChannelMgrDlg.ui" line="340"/>
        <source>隐藏</source>
        <translation>Hide</translation>
    </message>
    <message>
        <location filename="QChannelMgrDlg.ui" line="195"/>
        <source>修改</source>
        <translation>Modify</translation>
    </message>
    <message>
        <location filename="QChannelMgrDlg.ui" line="211"/>
        <source>0</source>
        <translation>0</translation>
    </message>
    <message>
        <location filename="QChannelMgrDlg.ui" line="240"/>
        <source>通道分配：</source>
        <translation>Channel assignment:</translation>
    </message>
    <message>
        <location filename="QChannelMgrDlg.ui" line="267"/>
        <source>删除通道</source>
        <translation>Delete channel</translation>
    </message>
    <message>
        <location filename="QChannelMgrDlg.ui" line="293"/>
        <source>增加通道</source>
        <translation>Add channel</translation>
    </message>
    <message>
        <location filename="QChannelMgrDlg.ui" line="326"/>
        <source>刷新</source>
        <translation>Refresh</translation>
    </message>
    <message>
        <location filename="QChannelMgrDlg.ui" line="333"/>
        <source>通道管理</source>
        <translation>Channel management</translation>
    </message>
</context>
<context>
    <name>QCryptokeyUI</name>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="14"/>
        <source>注册</source>
        <translation>Register</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="34"/>
        <source>退出</source>
        <translation>Close</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="66"/>
        <source>机器码：</source>
        <translation>MachineID:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="99"/>
        <source>注册码：</source>
        <translation>License:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="114"/>
        <source>激活</source>
        <translation>Active</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="126"/>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.cpp" line="41"/>
        <source>请输入注册码</source>
        <translation>Please input Licese</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="141"/>
        <source>激活状态：</source>
        <translation>State:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.ui" line="156"/>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.cpp" line="23"/>
        <source>未激活</source>
        <translation>No Active</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.cpp" line="41"/>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.cpp" line="49"/>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.cpp" line="57"/>
        <source>提示</source>
        <translation>Info</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.cpp" line="49"/>
        <source>注册码不匹配,请重新输入</source>
        <translation>No Match,Please Input the New One</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.cpp" line="27"/>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.cpp" line="54"/>
        <source>已激活</source>
        <translation>Active</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/cryptokey/QCryptokeyUI.cpp" line="57"/>
        <source>系统激活完成</source>
        <translation>the System Active Finish</translation>
    </message>
</context>
<context>
    <name>QDebugDlg</name>
    <message>
        <location filename="QDebugDlg.ui" line="14"/>
        <source>QDebugDlg</source>
        <translation>QDebugDlg</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="39"/>
        <source>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;SimSun&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;右侧是算法裁剪后的图像、匹配的型号、算法匹配的最小阈值、匹配模板对应的直径和厚度（新建模板时输入的）&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;SimSun&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;On the right is the image cropped by the algorithm, the matched model, the minimum threshold for algorithm matching, and the diameter and thickness of the matching template.(Input when creating a new template)&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="68"/>
        <source>000000</source>
        <translation>000000</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="82"/>
        <source>0.0</source>
        <translation>0.0</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="96"/>
        <source>厚度mm:</source>
        <translation>Thickness(mm):</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="110"/>
        <location filename="QDebugDlg.ui" line="153"/>
        <source>0</source>
        <translation>0</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="130"/>
        <source>直径mm：</source>
        <translation>Diameter(mm):</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="179"/>
        <location filename="QDebugDlg.cpp" line="98"/>
        <location filename="QDebugDlg.cpp" line="103"/>
        <source>开始模拟检测</source>
        <translation>Continus</translation>
    </message>
    <message>
        <location filename="QDebugDlg.ui" line="198"/>
        <source>采集一张</source>
        <translation>Signal</translation>
    </message>
    <message>
        <location filename="QDebugDlg.cpp" line="99"/>
        <source>停止</source>
        <translation>Stop</translation>
    </message>
</context>
<context>
    <name>QDia2ThSetting</name>
    <message>
        <location filename="../../src/tpMain/qdia2thsetting.ui" line="14"/>
        <source>直径标定</source>
        <translation>Diameter Standard</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qdia2thsetting.ui" line="23"/>
        <source>K:表示斜率，B：基准点，直径=高度*K+B</source>
        <translation>K: rate, B: base point, Diameter = H * K + B</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qdia2thsetting.ui" line="38"/>
        <source>确认修改</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qdia2thsetting.ui" line="64"/>
        <source>退出</source>
        <translation>Cancel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qdia2thsetting.ui" line="92"/>
        <source>B：</source>
        <translation>B:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qdia2thsetting.ui" line="99"/>
        <source>K:</source>
        <translation>K:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qdia2thsetting.cpp" line="30"/>
        <source>提示</source>
        <translation>Warning</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qdia2thsetting.cpp" line="30"/>
        <source>修改完成，参数已生效！</source>
        <translation>The modification is completed and the parameters are in effect!</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qdia2thsetting.cpp" line="32"/>
        <source>确定</source>
        <translation>OK</translation>
    </message>
</context>
<context>
    <name>QIPConfigDlg</name>
    <message>
        <location filename="../../src/tpMain/qipconfigdlg.ui" line="17"/>
        <source>QIPConfigDlg</source>
        <translation>QIPConfigDlg</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qipconfigdlg.ui" line="52"/>
        <source>本机服务器IP地址设置</source>
        <translation>Server address Settings</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qipconfigdlg.ui" line="58"/>
        <location filename="../../src/tpMain/qipconfigdlg.ui" line="142"/>
        <source>IP 地址(I)：</source>
        <translation>Address：</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qipconfigdlg.ui" line="72"/>
        <source>关闭服务</source>
        <translation>Close Server</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qipconfigdlg.ui" line="79"/>
        <source>开放端口：</source>
        <translation>Port:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qipconfigdlg.ui" line="93"/>
        <source>打开服务</source>
        <translation>Open Server</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qipconfigdlg.ui" line="103"/>
        <source>目标客户端IP地址设置</source>
        <translation>Client Address Settings</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qipconfigdlg.ui" line="109"/>
        <source>源端口：</source>
        <translation>Port:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qipconfigdlg.ui" line="177"/>
        <source>确定</source>
        <translation>OK</translation>
    </message>
</context>
<context>
    <name>QModNamedlg</name>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.ui" line="14"/>
        <source>模板名修改</source>
        <translation>Model Name modify</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.ui" line="29"/>
        <source>确认修改</source>
        <translation>Apply</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.ui" line="42"/>
        <location filename="../../src/tpMain/qmodnamedlg.cpp" line="84"/>
        <source>取消</source>
        <translation>Cancel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.ui" line="62"/>
        <source>缩略图：</source>
        <translation>Image:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.ui" line="74"/>
        <source>TextLabel</source>
        <translation>TextLabel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.ui" line="89"/>
        <source>旧型号名：</source>
        <translation>Old Name:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.ui" line="112"/>
        <source>新型号名：</source>
        <translation>New Name:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.cpp" line="64"/>
        <location filename="../../src/tpMain/qmodnamedlg.cpp" line="69"/>
        <source>提示</source>
        <translation>Prompt</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.cpp" line="64"/>
        <source>新型号名不能为空！</source>
        <translation>The new name can&apos;t be empty!</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.cpp" line="69"/>
        <source>型号库中已包含该型号，请重新设置型号名！</source>
        <translation>The model has been included in the model library. Please reset the model name!</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qmodnamedlg.cpp" line="83"/>
        <source>确认</source>
        <translation>OK</translation>
    </message>
</context>
<context>
    <name>QModelMgrDlg</name>
    <message>
        <location filename="QModelMgrDlg.ui" line="14"/>
        <source>QModelMgrDlg</source>
        <translation>QModelMgrDlg</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="138"/>
        <source>轮毂信息：</source>
        <translation>Model Info:</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="199"/>
        <source>型号</source>
        <translation>Name</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="498"/>
        <source>0%</source>
        <translation>0%</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="468"/>
        <source>阈值调节</source>
        <translation>Threshold</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="424"/>
        <source>严格</source>
        <translation>Strict</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="232"/>
        <source>旋转次数</source>
        <translation>Rotate</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="321"/>
        <source>缩略图</source>
        <translation>Thumbnail</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="449"/>
        <source>宽松</source>
        <translation>Easy</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="178"/>
        <source>厚度(mm)</source>
        <translation>Thickness(mm)</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="154"/>
        <source>直径(mm)</source>
        <translation>Diameter(mm)</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="274"/>
        <source>加入训练</source>
        <translation>Add to train</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="340"/>
        <source>最小偏距</source>
        <translation>Min Offset</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="367"/>
        <source>最大偏距</source>
        <translation>Max Offset</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="616"/>
        <source>基本操作</source>
        <translation>Basic operation</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="653"/>
        <location filename="QModelMgrDlg.ui" line="656"/>
        <source>删除模板</source>
        <translation>Delete</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="669"/>
        <source>训练当前模板</source>
        <translation>Training</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="672"/>
        <source>训练模板</source>
        <translation>Train</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="634"/>
        <source>添加新的模板</source>
        <translation>Add new</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="637"/>
        <source>新建模板</source>
        <translation>New</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="714"/>
        <source>训练所有模板，消耗时间会较长</source>
        <translation>Training all templates will take longer</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="717"/>
        <source>训练全部</source>
        <translation>Train all</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="685"/>
        <source>确认修改，每次修改模板的参数后都要确认修改才有效</source>
        <translation>Confirm the modification, every time you modify the parameters of the template, you must confirm the modification to be effective</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="688"/>
        <source>修改确认</source>
        <translation>Modify</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="701"/>
        <source>修改型号名</source>
        <translation>Modify Name</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="515"/>
        <source>图片显示：</source>
        <translation>Images:</translation>
    </message>
    <message>
        <source>TextLabel</source>
        <translation type="vanished">TextLabel</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="549"/>
        <location filename="QModelMgrDlg.ui" line="552"/>
        <source>添加已裁剪的轮毂图片</source>
        <translation>Add cropped wheel image</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="555"/>
        <source>追加</source>
        <translation>Add</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="587"/>
        <location filename="QModelMgrDlg.ui" line="590"/>
        <source>删除所有模板</source>
        <translation>Del All</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="25"/>
        <source>模板型号查询</source>
        <translation>Models</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="48"/>
        <source>查找：</source>
        <translation>Find:</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="79"/>
        <source>数量</source>
        <translation>Quantity</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.ui" line="101"/>
        <source>modelID</source>
        <translation>modelID</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="140"/>
        <location filename="QModelMgrDlg.cpp" line="145"/>
        <location filename="QModelMgrDlg.cpp" line="190"/>
        <location filename="QModelMgrDlg.cpp" line="195"/>
        <location filename="QModelMgrDlg.cpp" line="240"/>
        <location filename="QModelMgrDlg.cpp" line="245"/>
        <location filename="QModelMgrDlg.cpp" line="250"/>
        <location filename="QModelMgrDlg.cpp" line="317"/>
        <location filename="QModelMgrDlg.cpp" line="337"/>
        <location filename="QModelMgrDlg.cpp" line="409"/>
        <location filename="QModelMgrDlg.cpp" line="425"/>
        <location filename="QModelMgrDlg.cpp" line="429"/>
        <location filename="QModelMgrDlg.cpp" line="443"/>
        <location filename="QModelMgrDlg.cpp" line="451"/>
        <source>提示</source>
        <translation>Prompt</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="140"/>
        <location filename="QModelMgrDlg.cpp" line="145"/>
        <source>请选择一个您要追加图像的型号！</source>
        <translation>Please select a model you want to add an image to!</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="156"/>
        <source>加载图像</source>
        <translation>Load image</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="157"/>
        <source>图像加载中,请稍后.....</source>
        <translation>The image is loading, please wait...</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="166"/>
        <source>添加失败，不能添加带检测背景的图片作为模板！！！</source>
        <translation>Failed to add, you cannot add a picture with a detection background as a template! ! !</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="181"/>
        <source>加载完成</source>
        <translation>Download finished</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="190"/>
        <location filename="QModelMgrDlg.cpp" line="195"/>
        <location filename="QModelMgrDlg.cpp" line="451"/>
        <source>请选择一个您要修改的型号！</source>
        <translation>Please select a model you want to modify!</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="230"/>
        <source>修改了模板</source>
        <translation>Modified template</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="230"/>
        <source>的参数</source>
        <translation>The parameters of the</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="233"/>
        <source>修改成功！</source>
        <translation>Modified Successfully!</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="240"/>
        <location filename="QModelMgrDlg.cpp" line="245"/>
        <source>请选择一个您要删除的型号</source>
        <translation>Please select a model you want to delete</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="248"/>
        <source>按下了删除模板按钮</source>
        <translation>Press the Delete Template button</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="250"/>
        <source>是否删除型号</source>
        <translation>Whether to delete the model</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="250"/>
        <source>产品模板</source>
        <translation>Product template</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="257"/>
        <source>删除了模板</source>
        <translation>Template deleted</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="262"/>
        <location filename="QModelMgrDlg.cpp" line="306"/>
        <location filename="QModelMgrDlg.cpp" line="370"/>
        <location filename="QModelMgrDlg.cpp" line="505"/>
        <location filename="QModelMgrDlg.cpp" line="512"/>
        <location filename="QModelMgrDlg.cpp" line="556"/>
        <location filename="QModelMgrDlg.cpp" line="948"/>
        <location filename="QModelMgrDlg.cpp" line="1073"/>
        <source>共</source>
        <translation>with</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="262"/>
        <location filename="QModelMgrDlg.cpp" line="306"/>
        <location filename="QModelMgrDlg.cpp" line="505"/>
        <location filename="QModelMgrDlg.cpp" line="512"/>
        <location filename="QModelMgrDlg.cpp" line="1073"/>
        <source>个型号</source>
        <translatorcomment>Models</translatorcomment>
        <translation>number</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="269"/>
        <source>按下了添加模板按钮</source>
        <translation>Press the Add Template button</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="279"/>
        <source>产品信息设置</source>
        <translation>Product information settings</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="298"/>
        <source>添加了一个新的模型</source>
        <translation>Added a new model</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="317"/>
        <source>请选择一个您要训练的型号！</source>
        <translation>Please select a model you want to train!</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="328"/>
        <location filename="QModelMgrDlg.cpp" line="346"/>
        <source>训练模板线程未退出，请稍等</source>
        <translation>The training template thread did not exit, please wait</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="337"/>
        <source>将对所有型号模板进行重新训练，期间系统的检测功能将不能正常运行直到模板训练完成，全部重新训练模板将需要很长时间，期间将不能进行其他工作，是否继续执行？</source>
        <translation>All model templates will be retrained. During this period, the system&apos;s detection function will not operate normally until the template training is completed. It will take a long time for all templates to be retrained, during which other work will not be possible. Do you want to continue?</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="362"/>
        <source>确定删除该图像?</source>
        <translation>Determine to delete the image?</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="363"/>
        <source>模板图片删除</source>
        <translation>Template picture deletion</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="370"/>
        <location filename="QModelMgrDlg.cpp" line="556"/>
        <location filename="QModelMgrDlg.cpp" line="948"/>
        <source>个图像</source>
        <translation>Images</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="423"/>
        <source>警告</source>
        <translation>Warning</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="423"/>
        <source>即将删除模板库里的所有模板，是否继续？</source>
        <translation>All templates in the template library will be deleted. Do you want to continue?</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="425"/>
        <source>再次确认，是否全部删除？</source>
        <translation>Confirm again, delete all?</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="429"/>
        <source>没有模板!!!</source>
        <translation>No Model!!!</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="443"/>
        <source>全部删除完成!!!</source>
        <translation>Complete deletion!!!</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="558"/>
        <source>图像数量少于</source>
        <translation>The number of images is less than</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="558"/>
        <source>个,请及时补充训练样本</source>
        <translation>please supplement Images</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="633"/>
        <location filename="QModelMgrDlg.cpp" line="636"/>
        <location filename="QModelMgrDlg.cpp" line="643"/>
        <location filename="QModelMgrDlg.cpp" line="699"/>
        <location filename="QModelMgrDlg.cpp" line="736"/>
        <location filename="QModelMgrDlg.cpp" line="740"/>
        <location filename="QModelMgrDlg.cpp" line="741"/>
        <source>模板更新进度</source>
        <translation>Template update progress</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="633"/>
        <source>正在初始化所有模板 共需要训练%1个模板,请稍后.....</source>
        <translation>All templates are being initialized. A total of%1 templates need to be trained. Please wait a moment...</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="642"/>
        <source>正在训练%1的模板 已完成%2/%3,请稍后.....</source>
        <translation>The template training %1 is complete %2/%3, please wait...</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="698"/>
        <source>%1的模板获取特征 已完成%2/%3,请稍后.....</source>
        <translation>Template capture feature for %1 is complete for %2/%3, please wait...</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="735"/>
        <source>%1的模板训练完成 已完成%2/%3,请稍后.....</source>
        <translation>Template training for %1 completed %2/%3, please wait...</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="741"/>
        <source>全部模板更新完成！%1s</source>
        <translation>All templates updated!The %1 s</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="742"/>
        <source>对全部模板进行了重新训练，共%1个模板</source>
        <translation>All templates were retrained, with a total of%1 template</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="752"/>
        <source>模板正在准备请稍后.....</source>
        <translation>The Model is being prepared Please wait a moment.....</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="753"/>
        <location filename="QModelMgrDlg.cpp" line="760"/>
        <location filename="QModelMgrDlg.cpp" line="767"/>
        <location filename="QModelMgrDlg.cpp" line="768"/>
        <location filename="QModelMgrDlg.cpp" line="774"/>
        <location filename="QModelMgrDlg.cpp" line="821"/>
        <location filename="QModelMgrDlg.cpp" line="843"/>
        <location filename="QModelMgrDlg.cpp" line="844"/>
        <location filename="QModelMgrDlg.cpp" line="845"/>
        <location filename="QModelMgrDlg.cpp" line="864"/>
        <location filename="QModelMgrDlg.cpp" line="865"/>
        <location filename="QModelMgrDlg.cpp" line="866"/>
        <source>模板训练进度</source>
        <translation>Training progress</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="767"/>
        <location filename="QModelMgrDlg.cpp" line="768"/>
        <source>%1型号没有图片不能训练！</source>
        <translation>%1 can not be trained without images!</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="845"/>
        <source>%1的模板 正在获取特征值,请稍后....</source>
        <translation>The %1 is getting the feater value. Please wait...</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="866"/>
        <source>训练完成！%1s</source>
        <translation>Training completed! %1s</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="868"/>
        <source>训练了模板:%1</source>
        <translation>Model training:%1</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="1023"/>
        <source>确认</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="QModelMgrDlg.cpp" line="1024"/>
        <source>取消</source>
        <translation>Cancel</translation>
    </message>
</context>
<context>
    <name>QMySplashScreen</name>
    <message>
        <location filename="../../src/tpMain/splashScreen/qmysplashscreen.cpp" line="23"/>
        <source>程序正在启动...</source>
        <translation>The program is starting...</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="22"/>
        <source>虚拟相机触发</source>
        <translation>Virtual Camera</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="23"/>
        <source>硬件相机触发</source>
        <translation>Hardware Camera</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="24"/>
        <source>调试免登陆</source>
        <translation>Debugging free login</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="25"/>
        <source>正常工作模式</source>
        <translation>Normal working mode</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="27"/>
        <source>传感器触发</source>
        <translation>Sensor trigger</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="28"/>
        <source>软件触发</source>
        <translation>Software trigger</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="30"/>
        <source>下降沿触发</source>
        <translation>Falling</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="31"/>
        <source>上升沿触发</source>
        <translation>Rising</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1107"/>
        <source>警告</source>
        <translation>Warning</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1108"/>
        <source>本检测系统正在运行，您真的要关闭？</source>
        <translation>Are you sure  quit the System?</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1110"/>
        <source>确定</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1111"/>
        <source>取消</source>
        <translation>NO</translation>
    </message>
</context>
<context>
    <name>QSettingDlg</name>
    <message>
        <source>QSettingDlg</source>
        <translation type="vanished">QSettingDlg</translation>
    </message>
</context>
<context>
    <name>QShowImg</name>
    <message>
        <location filename="../../src/tpMain/qshowimg.ui" line="14"/>
        <source>检测背景图像显示</source>
        <translation>Background display</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qshowimg.ui" line="23"/>
        <source>退出</source>
        <translation>Exit</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qshowimg.ui" line="30"/>
        <source>我要更换背景</source>
        <translation>Change background</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qshowimg.ui" line="56"/>
        <source>pic</source>
        <translation>pic</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qshowimg.cpp" line="26"/>
        <source>没有用于检测的背景图，请更换检测背景</source>
        <translation>There is no background image for testing. Please change the testing background</translation>
    </message>
</context>
<context>
    <name>QSystemSettingDlg</name>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="40"/>
        <source>相关设备配置</source>
        <translation>Device Setting</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="41"/>
        <location filename="QSystemSettingDlg.cpp" line="222"/>
        <source>检测图像设置</source>
        <translation>Image Settings</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="42"/>
        <location filename="QSystemSettingDlg.cpp" line="313"/>
        <source>PLC相关设置</source>
        <translation>PLC Settings</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="43"/>
        <location filename="QSystemSettingDlg.cpp" line="426"/>
        <source>报警灯测试</source>
        <translation>Alarm Test</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="44"/>
        <source>高级功能</source>
        <translation>Developer</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="156"/>
        <source>属性</source>
        <translation>Property</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="157"/>
        <source>值</source>
        <translation>Value</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="170"/>
        <source>语言</source>
        <translation>Language</translation>
    </message>
    <message>
        <source>检测背景更换</source>
        <translation type="vanished">Background</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="225"/>
        <location filename="QSystemSettingDlg.cpp" line="226"/>
        <source>抠图后</source>
        <translation>After cutout</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="227"/>
        <location filename="QSystemSettingDlg.cpp" line="228"/>
        <source>原图</source>
        <translation>SourceImage</translation>
    </message>
    <message>
        <source>背景图</source>
        <translation type="vanished">Background</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="229"/>
        <source>检测结果</source>
        <translation>Result</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="230"/>
        <source>图像保存路径</source>
        <translation>Image Save Path</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="231"/>
        <location filename="QSystemSettingDlg.cpp" line="268"/>
        <source>设置保存路径</source>
        <translation>Save path</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="232"/>
        <location filename="QSystemSettingDlg.cpp" line="272"/>
        <source>打开图像路径</source>
        <translation>Open Image Path</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="233"/>
        <source>保存当前设置</source>
        <translation>Save current settings</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="236"/>
        <location filename="QSystemSettingDlg.cpp" line="248"/>
        <source>保存已匹配图</source>
        <translation>Save matched Image</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="242"/>
        <location filename="QSystemSettingDlg.cpp" line="254"/>
        <source>保存无匹配图</source>
        <translation>Save Unmatched Image</translation>
    </message>
    <message>
        <source>使用背景图</source>
        <translation type="vanished">Use background</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="260"/>
        <source>轮毂全去A通道</source>
        <translation>Hub All-to-A Channel</translation>
    </message>
    <message>
        <source>查看检测背景</source>
        <translation type="vanished">Check Background</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="276"/>
        <source>保存参数</source>
        <translation>Save Parameters</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="316"/>
        <location filename="QSystemSettingDlg.cpp" line="467"/>
        <source>保存设置</source>
        <translation>Save Settings</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="317"/>
        <source>传感器触发滤波(ms)</source>
        <translation>Sensor filtering (ms)</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="318"/>
        <source>相机触发延时(ms)</source>
        <translation>Sensor filtering (ms)</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="319"/>
        <source>相机触发脉宽(ms)</source>
        <translation>Camera width (ms)</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="320"/>
        <source>光源熄灭延时时间(ms)</source>
        <translation>Light delay time (ms)</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="321"/>
        <source>传感器触发类型</source>
        <translation>Sensor trigger type</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="322"/>
        <source>保持结果时长(ms)</source>
        <translation>Result hold Times (ms)</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="323"/>
        <source>连接超时次数</source>
        <translation>Connection timeouts</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="324"/>
        <source>超时是否显示信息</source>
        <translation>Display information</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="325"/>
        <location filename="QSystemSettingDlg.cpp" line="377"/>
        <source>是否自动重启服务器</source>
        <translation>Auto restart servering</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="326"/>
        <source>是否保存超时日志</source>
        <translation>Save timeout log</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="328"/>
        <source>发送并保存</source>
        <translation>Send and save</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="366"/>
        <source>超时提醒n次后自动重启服务</source>
        <translation>Automatically restart service after n timeout reminders</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="370"/>
        <source>是否显示提示</source>
        <translation>Display Warning</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="371"/>
        <source>勾选后通信超时时会显示提醒信息</source>
        <translation>Reminder message will be displayed when communication timeout occurs after checking</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="378"/>
        <source>勾选后通信超时次数达到后，系统将自动重启服务，PLC会自动重新连接</source>
        <translation>After checking the number of communication timeouts reached, the system will automatically restart the service, and the PLC will automatically reconnect</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="384"/>
        <source>保存信息到系统日志</source>
        <translation>Save information to system log</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="385"/>
        <source>勾选后表示超时信息将自动保存到系统日志中，便于查询</source>
        <translation>Check to indicate that the timeout information will be automatically saved to the system log for easy query</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="429"/>
        <source>红灯</source>
        <translation>Red light</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="430"/>
        <source>绿灯</source>
        <translation>Green light</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="431"/>
        <source>黄灯</source>
        <translation>Yellow light</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="432"/>
        <source>蜂鸣</source>
        <translation>Buzzing</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="434"/>
        <source>红灯闪一下</source>
        <translation>Red light flashed</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="435"/>
        <source>绿灯闪一下</source>
        <translation>Green light flashed</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="436"/>
        <source>黄灯闪一下</source>
        <translation>Yellow light flashed</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="437"/>
        <source>蜂鸣响一下</source>
        <translation>Bee rings</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="463"/>
        <source>开发者使用</source>
        <translation>Developers use</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="468"/>
        <source>相机模式</source>
        <translation>Camera mode</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="469"/>
        <source>虚拟相机触发时间</source>
        <translation>Trigger times</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="470"/>
        <source>系统模式</source>
        <translation>System mode</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="471"/>
        <source>相机触发模式</source>
        <translation>Trigger mode</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="472"/>
        <location filename="QSystemSettingDlg.cpp" line="504"/>
        <source>串口发送心跳包</source>
        <translation>Serial Port</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="473"/>
        <location filename="QSystemSettingDlg.cpp" line="510"/>
        <source>网络发送心跳包</source>
        <translation>Network</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="474"/>
        <location filename="QSystemSettingDlg.cpp" line="516"/>
        <source>串口发送通道结果</source>
        <translation>Serial Port</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="475"/>
        <location filename="QSystemSettingDlg.cpp" line="522"/>
        <source>网络发送检测结果</source>
        <translation>Network</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="476"/>
        <location filename="QSystemSettingDlg.cpp" line="528"/>
        <source>网络发送通道结果</source>
        <translation>Network</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="477"/>
        <source>光栅使用标志</source>
        <translation>Rester</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="478"/>
        <source>保存高度厚度数据</source>
        <translation>Data</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="479"/>
        <source>通道分配</source>
        <translation>Channel allocate</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="480"/>
        <source>启动时是否检测</source>
        <translation>Whether to detect at startup</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="481"/>
        <source>显示厚度数据</source>
        <translation>Display thickness data</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="482"/>
        <source>显示厚度采样数据</source>
        <translation>Display thickness sampling data</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="534"/>
        <source>使用光栅获取厚度</source>
        <translation>Acquiring Thickness by Grating</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="540"/>
        <source>保存数据用于测试</source>
        <translation>Save data for testing</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="546"/>
        <source>是否使用通道分配</source>
        <translation>Whether to use channel allocation or not</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="552"/>
        <source>是否启动就开始检测</source>
        <translation>Start checking if it&apos;s started</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="558"/>
        <location filename="QSystemSettingDlg.cpp" line="564"/>
        <source>是否显示</source>
        <translation>Whether to display</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="569"/>
        <source>保存</source>
        <translation>Save</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="840"/>
        <source>请选择您的背景图</source>
        <translation>Please select your background map</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="869"/>
        <source>提示</source>
        <translatorcomment>Info</translatorcomment>
        <translation>Warning</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="869"/>
        <source>背景图更新完成，请重启本软件.</source>
        <translation>Background image updated, please restart this software.</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="871"/>
        <source>确认</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="QSystemSettingDlg.cpp" line="1015"/>
        <source>打开文件夹</source>
        <translation>Open folder</translation>
    </message>
</context>
<context>
    <name>QSystemSettingUI</name>
    <message>
        <location filename="QSystemSettingUI.ui" line="14"/>
        <source>系统设置</source>
        <translation>System settings</translation>
    </message>
    <message>
        <location filename="QSystemSettingUI.ui" line="55"/>
        <source>参数设置已生效！！！</source>
        <translation>Apply Successful!!!</translation>
    </message>
</context>
<context>
    <name>QTimeMgrDlg</name>
    <message>
        <location filename="QTimeMgrDlg.ui" line="14"/>
        <source>班次管理</source>
        <translation>Classes management</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.ui" line="35"/>
        <location filename="QTimeMgrDlg.cpp" line="82"/>
        <location filename="QTimeMgrDlg.cpp" line="120"/>
        <source>未选中</source>
        <translation>UnSelect</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.ui" line="53"/>
        <source>添加时间</source>
        <translation>Add</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.ui" line="71"/>
        <source>删除时间</source>
        <translation>Delete</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.ui" line="89"/>
        <source>修改时间</source>
        <translation>Modify</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.cpp" line="22"/>
        <source>班次</source>
        <translation>Classes</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.cpp" line="22"/>
        <source>起始时间</source>
        <translation>Start</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.cpp" line="22"/>
        <source>结束时间</source>
        <translation>End</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.cpp" line="53"/>
        <source>设置参数</source>
        <translation>Setting parameters</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.cpp" line="69"/>
        <location filename="QTimeMgrDlg.cpp" line="70"/>
        <location filename="QTimeMgrDlg.cpp" line="149"/>
        <location filename="QTimeMgrDlg.cpp" line="150"/>
        <location filename="QTimeMgrDlg.cpp" line="202"/>
        <location filename="QTimeMgrDlg.cpp" line="203"/>
        <source>当天</source>
        <translation>Same day</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.cpp" line="69"/>
        <location filename="QTimeMgrDlg.cpp" line="70"/>
        <location filename="QTimeMgrDlg.cpp" line="149"/>
        <location filename="QTimeMgrDlg.cpp" line="150"/>
        <location filename="QTimeMgrDlg.cpp" line="202"/>
        <location filename="QTimeMgrDlg.cpp" line="203"/>
        <source>隔天</source>
        <translation>Next day</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.cpp" line="85"/>
        <location filename="QTimeMgrDlg.cpp" line="96"/>
        <location filename="QTimeMgrDlg.cpp" line="123"/>
        <source>提示</source>
        <translation>Prompt</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.cpp" line="85"/>
        <location filename="QTimeMgrDlg.cpp" line="123"/>
        <source>未选择班次，请选择进行修改。</source>
        <translation>No classes is selected, please select to modify.</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.cpp" line="87"/>
        <location filename="QTimeMgrDlg.cpp" line="98"/>
        <location filename="QTimeMgrDlg.cpp" line="125"/>
        <source>确认</source>
        <translation>Ok</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.cpp" line="92"/>
        <source>您确定要删除 %1 班次？</source>
        <translation>Are you sure you want to delete the %1 classes?</translation>
    </message>
    <message>
        <location filename="QTimeMgrDlg.cpp" line="99"/>
        <source>取消</source>
        <translation>Canncel</translation>
    </message>
</context>
<context>
    <name>QWorkItemDlg</name>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.cpp" line="12"/>
        <source>工单信息设置</source>
        <translation>Work List information setting</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.cpp" line="37"/>
        <location filename="../../src/tpMain/qworkItemdlg.cpp" line="44"/>
        <source>警告</source>
        <translation>Warning</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.cpp" line="37"/>
        <source>名称不能为空.</source>
        <translation>The name cannot be empty.</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.cpp" line="44"/>
        <source>你输入的名称:%1 重复.</source>
        <translation>The name :%1 repeat.</translation>
    </message>
</context>
<context>
    <name>QWorkItemUI</name>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.ui" line="14"/>
        <source>信息设置</source>
        <translation>Information setup</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.ui" line="29"/>
        <source>确定</source>
        <translation>Ok</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.ui" line="54"/>
        <source>取消</source>
        <translation>Cancel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.ui" line="81"/>
        <source>备注信息：</source>
        <translation>Note information:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkItemdlg.ui" line="95"/>
        <source>名称：</source>
        <translation>Name:</translation>
    </message>
</context>
<context>
    <name>QWorkMgrUI</name>
    <message>
        <source>QWorkMgrUI</source>
        <translation type="vanished">QWorkMgrUI</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="19"/>
        <source>检测配置任务表</source>
        <translation>Model Check</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="94"/>
        <source>工作任务表</source>
        <translation>Table List</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="131"/>
        <source>添加任务单</source>
        <translation>Add Table</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="134"/>
        <source>添加</source>
        <translation>Add</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="146"/>
        <source>删除任务单</source>
        <translation>Delete Table List</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="149"/>
        <source>删除</source>
        <translation>Del</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="161"/>
        <source>修改任务单名称或备注信息</source>
        <translation>Modify Table List Name or Note Information</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="164"/>
        <source>修改</source>
        <translation>Mod</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="176"/>
        <source>使用任务单</source>
        <translation>Set Use</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="179"/>
        <source>应用</source>
        <translation>Use</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="211"/>
        <source>当前选择的任务表：</source>
        <translation>Current Table：</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="255"/>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="495"/>
        <source>数量</source>
        <translation>Num</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="302"/>
        <source>添加型号到检测列表</source>
        <translation>Add model to table</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="305"/>
        <source>&lt;&lt;&lt;</source>
        <translation>&lt;&lt;&lt;</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="337"/>
        <source>从检测列表移除所选型号</source>
        <translation>Remove the selected model from the table</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="340"/>
        <source>&gt;&gt;&gt;</source>
        <translation>&gt;&gt;&gt;</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="371"/>
        <source>缩略图</source>
        <translation>Image</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="388"/>
        <source>只看已选</source>
        <translation>Selected</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="406"/>
        <source>只看未选</source>
        <translation>Unselected</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="424"/>
        <source>显示全部</source>
        <translation>Show all</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="466"/>
        <source>查找：</source>
        <translation>Find:</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="503"/>
        <source>其他</source>
        <translation>Others</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="520"/>
        <source>按照直径检测</source>
        <translation>By diameter</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="538"/>
        <source>按照厚度检测</source>
        <translation>By thickness</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.ui" line="556"/>
        <source>手动发送模板库</source>
        <translation>Send Models</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="32"/>
        <source>检测模板管理</source>
        <translation>Detection Model Management</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="191"/>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="555"/>
        <source>共 %1 个</source>
        <translation>Total of: %1</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="235"/>
        <source>当前使用的工单为 %1 </source>
        <translation>The current Table is%1 </translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="340"/>
        <source>以下型号为重复添加：
%1已被忽略.</source>
        <translation>The models are added repeatedly:%1, And They have been ignored.</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="341"/>
        <source>提醒</source>
        <translation>Warning</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="343"/>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="459"/>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="466"/>
        <source>确定</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="417"/>
        <source>工单 %1 被设为应用</source>
        <translation>Table %1 is seted to Using</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="432"/>
        <source>发送模板库</source>
        <translation>Send Template Library</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="457"/>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="464"/>
        <source>警告</source>
        <translation>Warning</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="457"/>
        <source>%1任务单正在使用不能被删除,请先切换到其他任务单,再删除该任务单？</source>
        <translation>%1 Table is Using and cannot be deleted. Please switch to another Table before deleting the Table?</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="460"/>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="467"/>
        <source>取消</source>
        <translation>Cancel</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="464"/>
        <source>是否要删除 %1 模型？</source>
        <translation>Do you want to delete the%1 model?</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="605"/>
        <source>序号</source>
        <translation>Num</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/qworkmgrui.cpp" line="605"/>
        <source>内容</source>
        <translation>About</translation>
    </message>
</context>
<context>
    <name>RoiImgViewer</name>
    <message>
        <location filename="../../src/tpMain/algela/RoiImgViewer.cpp" line="523"/>
        <location filename="../../src/tpMain/algela/RoiImgViewer.cpp" line="537"/>
        <source>line item is not created</source>
        <translation>line item is not created</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/algela/RoiImgViewer.cpp" line="557"/>
        <source>line item is already created</source>
        <translation>line item is already created</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/algela/RoiImgViewer.cpp" line="568"/>
        <source>rect item is already created</source>
        <translation>rect item is already created</translation>
    </message>
</context>
<context>
    <name>WheelCtrl</name>
    <message>
        <location filename="../../src/tpMain/WheelCtrl.cpp" line="28"/>
        <source>加载通道模块 ....</source>
        <translation>Loading Channel Module....</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/WheelCtrl.cpp" line="30"/>
        <source>加载模板库 ....</source>
        <translation>Loading Template Library....</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/WheelCtrl.cpp" line="33"/>
        <source>加载检测设置模块 ....</source>
        <translation>Load Detection Setup Module....</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/WheelCtrl.cpp" line="39"/>
        <source>加载数据库 ....</source>
        <translation>Load the database....</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/WheelCtrl.cpp" line="42"/>
        <source>加载班次管理模块 ....</source>
        <translation>Loading shift management module....</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/WheelCtrl.cpp" line="45"/>
        <source>加载其他模块 ....</source>
        <translation>Loading other modules....</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/WheelCtrl.cpp" line="49"/>
        <source>创建子线程 ....</source>
        <translation>Create subthreads....</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/WheelCtrl.cpp" line="56"/>
        <source>加载光栅通讯模块 ....</source>
        <translation>Loading grating communication module....</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/WheelCtrl.cpp" line="66"/>
        <source>模块加载完成，启动线程 ....</source>
        <translation>Module loading is completed and thread is started....</translation>
    </message>
    <message>
        <location filename="../../src/tpMain/WheelCtrl.cpp" line="231"/>
        <source>未登录</source>
        <translation>None</translation>
    </message>
</context>
<context>
    <name>lpMainWin</name>
    <message>
        <location filename="lpMainWin.ui" line="14"/>
        <source>轮毂型号识别</source>
        <translation>Model Detector Application</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="142"/>
        <source>image_zoom.ui</source>
        <translation>image_zoom.ui</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="162"/>
        <source>状态信息</source>
        <translation>Status</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="252"/>
        <location filename="lpMainWin.cpp" line="986"/>
        <source>开始检测</source>
        <translation>Start</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="276"/>
        <source>检测结果</source>
        <translation>Results</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="579"/>
        <source>无匹配(个)</source>
        <translation>No match</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="496"/>
        <source>已检测(个)</source>
        <translation>Detected</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="603"/>
        <source>匹配值</source>
        <translation>Score</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="630"/>
        <source>直径(mm)</source>
        <translation>Diameter</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="697"/>
        <source>时间(s)</source>
        <translation>Time(s)</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="331"/>
        <source>通道</source>
        <translation>Channel</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="310"/>
        <location filename="lpMainWin.ui" line="385"/>
        <location filename="lpMainWin.ui" line="411"/>
        <location filename="lpMainWin.ui" line="436"/>
        <location filename="lpMainWin.ui" line="463"/>
        <location filename="lpMainWin.ui" line="667"/>
        <location filename="lpMainWin.ui" line="720"/>
        <location filename="lpMainWin.ui" line="773"/>
        <source>0</source>
        <translation>0</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="647"/>
        <source>---------</source>
        <translation>---------</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="546"/>
        <source>None</source>
        <translation>None</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="526"/>
        <location filename="lpMainWin.cpp" line="118"/>
        <source>检测状态</source>
        <translation>Detect State</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="744"/>
        <source>厚度(mm)</source>
        <translation>Thickness</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="756"/>
        <source>偏距</source>
        <translation>Offset</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="832"/>
        <source>统计结果</source>
        <translation>Static</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="861"/>
        <source>modelID_detect</source>
        <translation>modelID_detect</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="861"/>
        <source>count</source>
        <translation>count</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="892"/>
        <source>交换班清零</source>
        <translation>Clear</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="907"/>
        <source>型号数量</source>
        <translation>Number</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="964"/>
        <location filename="lpMainWin.cpp" line="921"/>
        <source>模板管理</source>
        <translation>Model Manager</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="978"/>
        <source>数据查询</source>
        <translation>History</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="992"/>
        <source>模板勾选</source>
        <translation>Model Check</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="1006"/>
        <source>辅助工具</source>
        <translation>Test Tool</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="1020"/>
        <source>班次设置</source>
        <translation>Class Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="1034"/>
        <source>光栅标定</source>
        <translation>Raster Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="1048"/>
        <source>IP设置</source>
        <translation>IP Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="1062"/>
        <location filename="lpMainWin.cpp" line="835"/>
        <source>关于</source>
        <translation>About</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="1076"/>
        <source>登录</source>
        <translation>Login</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="1090"/>
        <source>用户管理</source>
        <translation>User Manager</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="1104"/>
        <source>系统设置</source>
        <translation>System Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="1118"/>
        <location filename="lpMainWin.cpp" line="947"/>
        <source>相机配置</source>
        <translation>Cam Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="1132"/>
        <source>算法设置</source>
        <translation>Algo Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.ui" line="1146"/>
        <location filename="lpMainWin.ui" line="1149"/>
        <source>注册产品</source>
        <translation>Registerer</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="44"/>
        <source>加载必要模块.....</source>
        <translation>Load the necessary modules.....</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="88"/>
        <location filename="lpMainWin.cpp" line="89"/>
        <source>工具</source>
        <translation>Tool</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="102"/>
        <location filename="lpMainWin.cpp" line="103"/>
        <source>帮助</source>
        <translation>Help</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="110"/>
        <location filename="lpMainWin.cpp" line="1939"/>
        <source>本系统未注册激活</source>
        <translation>The system is not activated</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="116"/>
        <source>系统时间</source>
        <translation>Time</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="117"/>
        <source>班次信息</source>
        <translation>Class Info</translation>
    </message>
    <message>
        <source>用户：</source>
        <translation type="vanished">User:</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="186"/>
        <source>历史</source>
        <translation>History</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="202"/>
        <source>系统初始化完成...</source>
        <translation>System initialization complete...</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="591"/>
        <source>显示识别结果</source>
        <translation>Display Result</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="665"/>
        <source>相机图像和背景图不一样，请更换检测背景！</source>
        <translation>The camera image is different from the background image, please change the detection background!</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="692"/>
        <source>警告!!!连续出现%1个未识别型号</source>
        <translation>Warning!!! %1 unidentified models appear continuously</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="694"/>
        <source>,未开启检测功能造成的</source>
        <translation>, Caused by not opening the detection function</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="719"/>
        <source>获得图像,正在计算中...</source>
        <translation>Calculating...</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="774"/>
        <source>注 销</source>
        <translation>Logout</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="779"/>
        <source>登 录</source>
        <translation>Login</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="799"/>
        <location filename="lpMainWin.cpp" line="826"/>
        <source>该功能未启用.</source>
        <translation>The feature is not enabled.</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="801"/>
        <location filename="lpMainWin.cpp" line="813"/>
        <location filename="lpMainWin.cpp" line="828"/>
        <location filename="lpMainWin.cpp" line="913"/>
        <source>确认</source>
        <translation>Ok</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="811"/>
        <source>你确定要注销</source>
        <translation>Are you sure you want to log out</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="854"/>
        <source>班次管理</source>
        <translation>Classes Manager</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="865"/>
        <source>调试工具</source>
        <translation>Test Tool</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="889"/>
        <source>算法参数</source>
        <translation>Algo Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="911"/>
        <source>请停止检测再使用该功能.</source>
        <translation>Please Stop Detecting .</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="934"/>
        <source>系统参数设置</source>
        <translation>System Setting</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="977"/>
        <location filename="lpMainWin.cpp" line="1097"/>
        <source>停止检测</source>
        <translation>Stop</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="979"/>
        <source>按下了开始检测按钮，检测功能开启</source>
        <translation>Press the start detection button, the detection function is turned on</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="987"/>
        <source>按下了停止检测按钮，检测功能关闭</source>
        <translation>Press the stop detection button, the detection function is closed</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="799"/>
        <location filename="lpMainWin.cpp" line="811"/>
        <location filename="lpMainWin.cpp" line="826"/>
        <location filename="lpMainWin.cpp" line="911"/>
        <location filename="lpMainWin.cpp" line="994"/>
        <source>提示</source>
        <translation>Info</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="994"/>
        <source>将清空所有数据</source>
        <translation>Are you sure Clear the Static</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="995"/>
        <source>确定</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="814"/>
        <location filename="lpMainWin.cpp" line="996"/>
        <source>取消</source>
        <translation>NO</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="119"/>
        <source>用户:</source>
        <translation>User:</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="120"/>
        <source>PLC连接</source>
        <translation>PLC State</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="609"/>
        <location filename="lpMainWin.cpp" line="623"/>
        <location filename="lpMainWin.cpp" line="637"/>
        <location filename="lpMainWin.cpp" line="653"/>
        <source>当前曝光时间未识别到轮毂！</source>
        <translation>The current exposure time does not recognize the hub！</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="619"/>
        <location filename="lpMainWin.cpp" line="649"/>
        <source>调整5次曝光时间后依然未能识别到轮毂！</source>
        <translation>After adjusting the exposure time for 5 times, the wheel hub is still not recognized！</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="960"/>
        <source>注册</source>
        <translation>Register</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1002"/>
        <source>按下了清零按钮，数据全部清零</source>
        <translation>Press the reset button, all data are cleared</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1013"/>
        <source>天</source>
        <translation>D</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1014"/>
        <source>时</source>
        <translation>H</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1015"/>
        <source>分</source>
        <translation>M</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1016"/>
        <source>秒</source>
        <translation>S</translation>
    </message>
    <message>
        <source>系统时间:</source>
        <translation type="vanished">System time:</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1041"/>
        <source>运行时长:</source>
        <translation>Time:</translation>
    </message>
    <message>
        <source>检测状态:</source>
        <translation type="vanished">Status:</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1048"/>
        <source>检测中...</source>
        <translation>Detecting...</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1048"/>
        <source>未检测...</source>
        <translation>Not Detected...</translation>
    </message>
    <message>
        <source>班次信息：</source>
        <translation type="vanished">Classes info:</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1063"/>
        <source>该时间段未设置班次</source>
        <translation>No Classes</translation>
    </message>
    <message>
        <source>当前用户：</source>
        <translation type="vanished">Current user:</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1063"/>
        <source>班次信息:</source>
        <translation>Class:</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1069"/>
        <source>当前用户:</source>
        <translation>User:</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1076"/>
        <source>PLC已连接</source>
        <translation>PLC Connect</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1080"/>
        <source>PLC未连接</source>
        <translation>PLC Disconnect</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1175"/>
        <source>模板库发送完成</source>
        <translation>Template library sending completed</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1201"/>
        <location filename="lpMainWin.cpp" line="1226"/>
        <source>正在检测型号数</source>
        <translation>Number of models</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1275"/>
        <source>已连接</source>
        <translation>Connected</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1279"/>
        <source>已断开</source>
        <translation>Disconnected</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1332"/>
        <source>PLC已收到相关设置参数！</source>
        <translation>The PLC has received the relevant setting parameters!</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1391"/>
        <source>已打开</source>
        <translation>Opened</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1393"/>
        <source>已关闭</source>
        <translation>Closed</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1505"/>
        <source>轮毂型号识别系统</source>
        <translation>Wheel Model Identification System</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1506"/>
        <source>本软件由杭州利珀科技开发，用于轮毂型号识别和分类，可搭配流水线运输系统使用</source>
        <translation>This software is developed by Leaper  in Hangzhou. It is used for hub type identification and classification. It can be used with pipeline transportation system</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1507"/>
        <source>若需要进一步了解该产品的相关信息，请访问我们的网站</source>
        <translation>For more information about this product, please visit our website</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1508"/>
        <source>软件版本</source>
        <translation>Software Version</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1509"/>
        <source>算法版本</source>
        <translation>Algorithm Version</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1510"/>
        <source>最后更新时间</source>
        <translation>Last update time</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1511"/>
        <source>版权 (c) 属 杭州利珀科技有限公司 所有</source>
        <translation>Copyright(C) belongs to Hangzhou Leaper Technology company</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1520"/>
        <source>关闭</source>
        <translation>Shut down</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1678"/>
        <source>(默认)</source>
        <translation>(Default)</translation>
    </message>
    <message>
        <location filename="lpMainWin.cpp" line="1683"/>
        <source>默认通道 值1000</source>
        <translation>1000 (Default)</translation>
    </message>
</context>
</TS>